Gaz M Posted May 26, 2007 Report Share Posted May 26, 2007 is there anyway to remove a tryall freewheel without using the special tool? Need fast replys pleeease Quote Link to comment Share on other sites More sharing options...
powerz Posted May 26, 2007 Report Share Posted May 26, 2007 (edited) Well i thought the tryall ones were the same as the acs claw one, got 4 counter sunk tabs.Ifso the only way's i can think of removing it is:Use a chizel and hammer keep hitting the sunken tabs round, its worked for me in the past after smashing it for some time.orIf you dont want the freewheel anymore i,e its broke, strip the freewheel right down and put the remaning part of the freewheel in a vice and yank on the crank arm till it comes loose, if you know what i mean.Hope you get it off as freewheels can be a real pain to remove. Edited May 26, 2007 by powerz Quote Link to comment Share on other sites More sharing options...
James Quigley Posted May 26, 2007 Report Share Posted May 26, 2007 If it helps my mate had the tool and still couldn't get it off.Seriously we had his Vauxhall Vairio? Van parked on the crank arm and we were stamping on an 18" spanner and it was going nowhere. Quote Link to comment Share on other sites More sharing options...
Adam-Griffin Posted May 27, 2007 Report Share Posted May 27, 2007 i had the same problem , hammer and chisel doesnt work unless you have a bloooody hard hit , it was cheeper and easier with the correct tool , a vice and an air gun !Adam Quote Link to comment Share on other sites More sharing options...
matt! Posted May 27, 2007 Report Share Posted May 27, 2007 If it helps my mate had the tool and still couldn't get it off.Seriously we had his Vauxhall Vairio? Van parked on the crank arm and we were stamping on an 18" spanner and it was going nowhere.get some muscle on you then..nah they come off just need loads of leaverage..gaz i have the tool Quote Link to comment Share on other sites More sharing options...
Gaz M Posted May 27, 2007 Author Report Share Posted May 27, 2007 dont matter, i got it off in the end.Joe b the power house sorted me out Quote Link to comment Share on other sites More sharing options...
joe b Posted May 27, 2007 Report Share Posted May 27, 2007 dont matter, i got it off in the end.Joe b the power house sorted me out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.