David Biddle™ Posted May 25, 2007 Report Share Posted May 25, 2007 ok today i have split my hose on my rear dengura and have just fixed it but im having probs bleeding it with water has eneyone had eney exsperince bleeding these brakes with water all help and coments will be great cheers biddle Quote Link to comment Share on other sites More sharing options...
Balman Posted May 25, 2007 Report Share Posted May 25, 2007 mines still bled with oil but my friend did it and had to bleed a few times to clear out the oil once this was done it was fine if need be just rebleed with oil again but no reason it shouldnt work Jack Quote Link to comment Share on other sites More sharing options...
Phatmike Posted May 25, 2007 Report Share Posted May 25, 2007 Yeah, mine was a bit of a b*****d to do.I'd recommend using GT85 or similar, if not for the lubricating properties, but it also has a nicer feel to water.I'd suggest bleeding it as you would normally, then close the caliper end up, and leave it to hang with the syringe/lever end at the top. Keep tapping it, and pumping the lever slowly, and all the air will rise up and out the system. Quote Link to comment Share on other sites More sharing options...
David Biddle™ Posted May 25, 2007 Author Report Share Posted May 25, 2007 cheers boys for the help im on it now cheers birdsbiddle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.