Up'n'away Posted May 24, 2007 Report Share Posted May 24, 2007 Hey , i have searched quickly and have not found anything.Basicly my rotor is buckled, i can see this when it goes through the caliper , side to side it spins.How can i fix this quick? I am supposed to riding in 2 hours aww!Its a hope mono btw.Cheers in advancebrad Quote Link to comment Share on other sites More sharing options...
j-bonham@hotmail.com Posted May 24, 2007 Report Share Posted May 24, 2007 Large adjustable spanner...... just bend it back. dont be too hard though.you can get alot of power from not much push. Quote Link to comment Share on other sites More sharing options...
Simpson Posted May 24, 2007 Report Share Posted May 24, 2007 Get an adjestable spannerset it to the width of your rotarfind the centre of the bendput the spanner over itbend it back2 secondssorted Quote Link to comment Share on other sites More sharing options...
Mod Man Leo Posted May 24, 2007 Report Share Posted May 24, 2007 Get an adjestable spannerset it to the width of your rotarfind the centre of the bendput the spanner over itbend it back2 secondssortedthats right , but get the spanner on the rotor and adjust it RIGHT to the rotor.REMEMBER A LITTLE BEND GOES ALONG WAY.True it by doing the SMALLEST movements, Quote Link to comment Share on other sites More sharing options...
Up'n'away Posted May 24, 2007 Author Report Share Posted May 24, 2007 i think i totaly fooked it Ordered a new one earlier on today, cheers tarty! Quote Link to comment Share on other sites More sharing options...
trialsguru Posted May 24, 2007 Report Share Posted May 24, 2007 hahaha you should see how bent mine is, you might actually cry... Quote Link to comment Share on other sites More sharing options...
King C Posted May 24, 2007 Report Share Posted May 24, 2007 (edited) If its not too bad then just ride with it. It'll soon straighten itself out. Edited May 24, 2007 by kcchan Quote Link to comment Share on other sites More sharing options...
Simpson Posted May 24, 2007 Report Share Posted May 24, 2007 I was doing a drop gap and half way down i saw my front wheel out, caliper got stuck in the rotar and bent it to f**kery but got it back ridable again using my tech. Quote Link to comment Share on other sites More sharing options...
Up'n'away Posted May 24, 2007 Author Report Share Posted May 24, 2007 (edited) Well, i didnt take note of - small bends does alot", by time i had finished trying to unbuckle it , i was much worse off, i had totaly bent the top.. Ah well, needed some new bolts as when i got the bike they were odd and rounding off!Ride and it will sort itself kcchan? : , I tryed that, the leaver kept going stiff then clicking as it bent the rotor! Edited May 24, 2007 by Up'n'away Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.