Ash-Kennard Posted May 20, 2007 Report Share Posted May 20, 2007 (edited) i dont think this has ever been asked before, but would i be possible to cut down the pro 2 trials end caps so it would fit in a mod/ mod stock frame?is it possible? help me...also, if i cut 10mm off each one, would i need a serrated edge that comes standard in a modstock frame? or will i just use chain tugs/snail camms? Edited May 20, 2007 by ash-kennard Quote Link to comment Share on other sites More sharing options...
Christophe' Posted May 20, 2007 Report Share Posted May 20, 2007 what about the axle ash? it will be a bit long wont it. Quote Link to comment Share on other sites More sharing options...
Ash-Kennard Posted May 20, 2007 Author Report Share Posted May 20, 2007 dunno, will it? hence my question, is it doable? Quote Link to comment Share on other sites More sharing options...
Christophe' Posted May 20, 2007 Report Share Posted May 20, 2007 sounds like a plan, You would have to look into getting a modified axle made up specialy. Quote Link to comment Share on other sites More sharing options...
Felix Posted May 20, 2007 Report Share Posted May 20, 2007 You can't cut 10mm off the driveside. It will rub on the freehub body.A normal Pro II hub shell + the shorter trials freehub might be a solution?! Quote Link to comment Share on other sites More sharing options...
Bigman Posted May 20, 2007 Report Share Posted May 20, 2007 You can't cut 10mm off the driveside. It will rub on the freehub body.A normal Pro II hub shell + the shorter trials freehub might be a solution?!As felix says, but you will also have to modify the axle, turn it down some how, making sure that the threads for the axle bolts go in far enough....Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.