lankyri Posted April 29, 2007 Report Share Posted April 29, 2007 ok built my new rim and all that but it needs dishing how do you do itbtw its rubbing on the left side (non driveside) i take it you just tenstion up all the spokes on the right side evenally please help Quote Link to comment Share on other sites More sharing options...
basher Posted April 29, 2007 Report Share Posted April 29, 2007 You can either tension the driveside spokes or untension the non drive side. Make sure you do all spokes evenly and i would only do quarter or half turn at a time. Quote Link to comment Share on other sites More sharing options...
Shaun H Posted April 29, 2007 Report Share Posted April 29, 2007 Remember drive-side should be noticeably stiffer than the non-drive-side. Quote Link to comment Share on other sites More sharing options...
lankyri Posted April 29, 2007 Author Report Share Posted April 29, 2007 cheers guys il invade my local bike shop tomoz and do it lol Quote Link to comment Share on other sites More sharing options...
RomanC Posted April 30, 2007 Report Share Posted April 30, 2007 cheers guys il invade my local bike shop tomoz and do it lolIt actually helps to loosen and tesion both sides, as you go. Loosen a spoke on the left and then tighten a spoke on the right. Start the valve hole so that you know when you have done one revolution and adjusted all the spokes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.