mini rayner Posted March 22, 2007 Report Share Posted March 22, 2007 has anyone had problems with t-pros makeing clicking nosies as you peadle cheers rayner Quote Link to comment Share on other sites More sharing options...
Ash-Kennard Posted March 22, 2007 Report Share Posted March 22, 2007 its probably your freewheel. Quote Link to comment Share on other sites More sharing options...
Tom_ Posted March 22, 2007 Report Share Posted March 22, 2007 its probably your freewheel.lmao. Quote Link to comment Share on other sites More sharing options...
paulbell123 Posted March 22, 2007 Report Share Posted March 22, 2007 (edited) Hi do u run a ACS free wheel, if so the lock ring may have come lose, You need to tighten it up with a little flat head screw driver, And put it in the little hole in the lock ring, And turn the crank arm around till its tight. hope i helped paul bell. Edited March 22, 2007 by paulbell123 Quote Link to comment Share on other sites More sharing options...
_Owen. Posted March 22, 2007 Report Share Posted March 22, 2007 try tightening up your cranks, i had simlar problems Quote Link to comment Share on other sites More sharing options...
Ash-Kennard Posted March 22, 2007 Report Share Posted March 22, 2007 Also, grease up the spline in your cranks. Quote Link to comment Share on other sites More sharing options...
turkey Posted March 22, 2007 Report Share Posted March 22, 2007 Heres some advice don't go downhilling on a t-pro that might helpdan... Quote Link to comment Share on other sites More sharing options...
charlie >est< Posted March 22, 2007 Report Share Posted March 22, 2007 (edited) Right.... where shall I start... what bike is it. all your telling us is that is a T-Pro it could be a 2000, 2003, 2005, 2007 what? and were exactly is the noise coming from and can you feel it?You must explain things, remember we are not psychic's.I did have a noise coming from my bottom bracket when I pedal on my T-Pro 07.BB's do need lubracation of some sort every now and then.Squirt some WD40 in side the BB then spin the pedals fast (or just ride it quickly).I The noise should stop within a few minutes.Hope this helps.Charlie Edited March 22, 2007 by charlie >est< Quote Link to comment Share on other sites More sharing options...
1337 Trials Posted March 22, 2007 Report Share Posted March 22, 2007 MY mate had this problem but he just tightened his freewheel and cranks and its ok now (Well I think). I also have this problem when my freewheel comes loose So just tighten the old freewheel bud and see what happens from there Goodluck- ~Matty Quote Link to comment Share on other sites More sharing options...
tryalltom Posted March 23, 2007 Report Share Posted March 23, 2007 Heres some advice don't go downhilling on a t-pro that might helpdan... ye rayner you mupet its like buying a lambo to of rodingcya tear Quote Link to comment Share on other sites More sharing options...
downhill_rob2@hotmail.com Posted March 23, 2007 Report Share Posted March 23, 2007 ye rayner you mupet its like buying a lambo to of rodingcya tear In english? Quote Link to comment Share on other sites More sharing options...
tryalltom Posted March 23, 2007 Report Share Posted March 23, 2007 In english?sorry is said yes rayner it is like buying a lambo for of roading Quote Link to comment Share on other sites More sharing options...
20inchsuperstar Posted March 23, 2007 Report Share Posted March 23, 2007 probably the bb, or freewheel. if its an acs, dont even look twice at it its probably commited suicide like they all seem to, if it stil works however, tighten it a bit and it should be fine.matt Quote Link to comment Share on other sites More sharing options...
Dan6061 Posted March 23, 2007 Report Share Posted March 23, 2007 If it's coming from the drivechain:Check the freewheel. - If it's loose, tighten it, or clean it.Check the chain. - Could have tight spots...Check the pedals. - They can sometimes creak, try greasing and tightening the bearings.Check the BB/Cranks. - Clean out the tapers, and oil/grease it a little bit.If it's from the steering.Check the headset. - Clean and re-grease the bearings, and make sure there's no dirt in it. Also make sure it's not loose.Check the bars. - Maybe cracked. Also take the out the stem, and give them a wipe down, also the clamp part of the stem. Sometimes they get dirty, and just creeaakk.Check the forks. - Could be cracked?Think that's it? Quote Link to comment Share on other sites More sharing options...
MONTY DOUBLE DISC Posted March 23, 2007 Report Share Posted March 23, 2007 listen to turkey and do some trialsin on your bike not DOWNHILLIN Quote Link to comment Share on other sites More sharing options...
charlie >est< Posted March 24, 2007 Report Share Posted March 24, 2007 I just thought. I have cage pedals and once the bolts werent tightened up enough. If you have cage pedals tighten the bolts.Hiope this helps,Charlie.P.S. Click here < Buy one. Quote Link to comment Share on other sites More sharing options...
mini rayner Posted March 24, 2007 Author Report Share Posted March 24, 2007 Right.... where shall I start... what bike is it. all your telling us is that is a T-Pro it could be a 2000, 2003, 2005, 2007 what? and were exactly is the noise coming from and can you feel it?You must explain things, remember we are not psychic's.I did have a noise coming from my bottom bracket when I pedal on my T-Pro 07.BB's do need lubracation of some sort every now and then.Squirt some WD40 in side the BB then spin the pedals fast (or just ride it quickly).I The noise should stop within a few minutes.Hope this helps.Charlie Cheers for the help i did what you said and it works fine now cheersMY mate had this problem but he just tightened his freewheel and cranks and its ok now (Well I think). I also have this problem when my freewheel comes loose So just tighten the old freewheel bud and see what happens from there Goodluck- ~Mattycheers for the help i did what you said and it works fine now cheers Quote Link to comment Share on other sites More sharing options...
charlie >est< Posted March 24, 2007 Report Share Posted March 24, 2007 Cheers for the help i did what you said and it works fine now cheerscheers for the help i did what you said and it works fine now cheershuh? Who helped? im confused. Quote Link to comment Share on other sites More sharing options...
1337 Trials Posted March 25, 2007 Report Share Posted March 25, 2007 Cheers for the help i did what you said and it works fine now cheerscheers for the help i did what you said and it works fine now cheers Np mate, im glad its ok now ~Matty Quote Link to comment Share on other sites More sharing options...
bcourt2005 Posted March 25, 2007 Report Share Posted March 25, 2007 My mate had this problem after having a new BB fitted to his t-pro.All it needed was some good old greasing in the BB itself cos the bearings were dry apparently Quote Link to comment Share on other sites More sharing options...
Pagie Posted March 25, 2007 Report Share Posted March 25, 2007 Ive been having the same problem! but my freewheel and rear cog dont line up, could this be your problem? Cheer Chris Quote Link to comment Share on other sites More sharing options...
1337 Trials Posted March 25, 2007 Report Share Posted March 25, 2007 (edited) All my drive train like freewheel and cranks and bb (if that is part of the drivetrain, lol) but anyway there all messed up really and I need new cranks,freewheel. Ps. This is all I need doing to my bike then it be a good bike ~Matty Edited March 25, 2007 by Matt-y Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.