Tom_ Posted March 20, 2007 Report Share Posted March 20, 2007 Basically i am to poor to be able to afford a bash ring at the moment.. soooo i decided to make one. I have some chequer plat stuff which is about 4mm thick, basically i want to know what i have to do to it (other than cut it into a circle bigger than my tensile) to make it work out ok.....cheers. Quote Link to comment Share on other sites More sharing options...
CurtisRider Posted March 20, 2007 Report Share Posted March 20, 2007 buy/borrow some holesaws, very quick and easy way to make 1 just need to drill the outside out first, clamp the bash into a vice, and drill the inside out and it'll be done, simple as that Quote Link to comment Share on other sites More sharing options...
nafan Posted March 20, 2007 Report Share Posted March 20, 2007 As long as you have enough clearance and it fits snugly on the crank arm, I don't see why it needs to be that perfect, just make sure you get your dimensions right, and make it a few mil bigger on the outside too 'cos then it won't wear out as quickly (obviously)Nathan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.