Ashley Smith Posted March 14, 2007 Report Share Posted March 14, 2007 as the title says i could do with finding out of a shop which has a headtube ream and facing tool capable of facing and reaming a integrated headtube.does anyone know of any?its needed to face the headtube on my 231 ti, which is slightly out of sqaure meaning the headset tightens unevenly so i could do with just having it faced.the integrated headtube is the type that has an outer diameter of 50mm and inner diameter of 44mm where the cups press intocheers for any helpbest regards ash Quote Link to comment Share on other sites More sharing options...
RobinJI Posted March 14, 2007 Report Share Posted March 14, 2007 Intergrated or internal? You say intergrated but montys and the kind you describe are internal.If it is an intergrated for some reason, I'm pretty sure its tough, and you cant do it. It's why intergrated headsets are bolocks.If it is internal, like on the montys, then I havent yet heard of anywhere, but I would have thought someone does them. Quote Link to comment Share on other sites More sharing options...
Shaun H Posted March 14, 2007 Report Share Posted March 14, 2007 If you have a park facing/reaming set then you can buy the parts needed to fit the tool.Ring round your LBSs and see if any of them have the parts needed. Quote Link to comment Share on other sites More sharing options...
future orange 660 Posted March 14, 2007 Report Share Posted March 14, 2007 or find a frame builders. most small lbs's are unlikey to have one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.