ben_travis Posted March 13, 2007 Report Share Posted March 13, 2007 what are the chances of taking apart the hub without the tool?also where can i get a non-drive side bearing for a singlespeed hub fromlet me know ur ideas pleasei know it has been done Quote Link to comment Share on other sites More sharing options...
Janson Posted March 13, 2007 Report Share Posted March 13, 2007 two pics attatched.. this is how i did it, think joe maher did the same. it does work, and it does damage the spring retainer slightly, mine is fine though! watch tartys king service video before, that way you know what parts go where and how it works. if you're confused by the video, it will make sense when you've got the internals in your hands.do it on your own risk, don't hold me responsible if you break your hub or yourself, ok? goes for everyone else also. Quote Link to comment Share on other sites More sharing options...
Biff... Posted March 13, 2007 Report Share Posted March 13, 2007 Can you take the BMX hubs appart without any tools? Quote Link to comment Share on other sites More sharing options...
Felix Posted March 13, 2007 Report Share Posted March 13, 2007 Can you take the BMX hubs appart without any tools?With a 3/32" allen key you can remove axle and driveshell.To proceed further you need the hub tool or follow Robert's guide. Quote Link to comment Share on other sites More sharing options...
Joe Papasnap Maher Posted March 13, 2007 Report Share Posted March 13, 2007 Can you take the BMX hubs appart without any tools?Yes...do as robert sed.Hammer and screwdriver done me proud when i did it to mine. Quote Link to comment Share on other sites More sharing options...
ben_travis Posted March 13, 2007 Author Report Share Posted March 13, 2007 ace.second problemhow do i get the non drive side bearing out? there is a lip in the way. hammer still??? Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted March 13, 2007 Report Share Posted March 13, 2007 Hub tool ideally... if you try and bodge it you'll split the bearing open. Quote Link to comment Share on other sites More sharing options...
ben_travis Posted March 13, 2007 Author Report Share Posted March 13, 2007 u guys sell the bearings adam? Quote Link to comment Share on other sites More sharing options...
Greetings Posted March 13, 2007 Report Share Posted March 13, 2007 ClickYou should understand from just looking at the pics.aspirevelotech for bearings? Quote Link to comment Share on other sites More sharing options...
ben_travis Posted March 13, 2007 Author Report Share Posted March 13, 2007 cheers guys. its all back together sweetlycheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.