harmertrials Posted March 2, 2007 Report Share Posted March 2, 2007 is there any other way to regain pressure in my magura other than bleeding. Yestreday the hose came slighty loose and a tiny bit of oil leaked out ( and I mean like a drip) but obviously the pressure has now changed. The brake still grips perfectly but I want to know if I can get some more pressure into it somehow. I have moved the pads right in and adjusted the TPA to its maximum but the lever is still nearly touching the grip when squeezed. Is there anything I can do, no sarcastic comments please. Thanks Quote Link to comment Share on other sites More sharing options...
moto_psycho Posted March 2, 2007 Report Share Posted March 2, 2007 no other way atall mate, there are a few methods on this site, have a good search, check the pipe for leaks etc just insase, but if the pipe came out, theres air there Quote Link to comment Share on other sites More sharing options...
Blommah Posted March 2, 2007 Report Share Posted March 2, 2007 you need to re-bleed it, if oil came out, air came in. Quote Link to comment Share on other sites More sharing options...
harmertrials Posted March 2, 2007 Author Report Share Posted March 2, 2007 ok cheers guys. I had my fingers crossed because I hate doing bleeds, oh well... Quote Link to comment Share on other sites More sharing options...
harmertrials Posted March 5, 2007 Author Report Share Posted March 5, 2007 I gave it a bleed and its beter than ever, probably my most successful bleed so far. Quote Link to comment Share on other sites More sharing options...
MikeCottTrials Posted March 5, 2007 Report Share Posted March 5, 2007 gravy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.