Blommah Posted February 18, 2007 Report Share Posted February 18, 2007 Well, on my hope mono trial 06 the disc keeps coming loose, anyone else had that problem? Im scared that it will damage the threads in my hub.Besides loctiting, any tips?cheers. Quote Link to comment Share on other sites More sharing options...
squince Posted February 18, 2007 Report Share Posted February 18, 2007 Commen problem, personally i would loctite them in. Quote Link to comment Share on other sites More sharing options...
watto Posted February 18, 2007 Report Share Posted February 18, 2007 all of the bolts should have loctite on them were they were purchased but sometimes it comes off so jus wack some more on or use superglue Quote Link to comment Share on other sites More sharing options...
Tylerlovesalex Posted February 18, 2007 Report Share Posted February 18, 2007 (edited) Yeah quite a bit but i bought new bolts and now its fine,so super glue or new bolts, if you buy new bolt buy Allen key bolt as there less pron to round offplus like 90% of trials *riders carry Allen keys round with them so would be no trouble to titan again!cheers tyler . Edited February 18, 2007 by Xx-OnZa-xX Quote Link to comment Share on other sites More sharing options...
Sam Oliver Posted February 18, 2007 Report Share Posted February 18, 2007 If you have got a decent torx t bar you can get them super tight Quote Link to comment Share on other sites More sharing options...
Ra964 Posted February 18, 2007 Report Share Posted February 18, 2007 i used rubber solution and it works ace..... Quote Link to comment Share on other sites More sharing options...
Blommah Posted February 18, 2007 Author Report Share Posted February 18, 2007 Superglue? would it work? wouldnt damage anything? Quote Link to comment Share on other sites More sharing options...
Simpson Posted February 18, 2007 Report Share Posted February 18, 2007 i just loctited mine on.... when it came to taking it off it just cracked loose then screwed out fine! just do that! Quote Link to comment Share on other sites More sharing options...
Blommah Posted February 18, 2007 Author Report Share Posted February 18, 2007 i just loctited mine on.... when it came to taking it off it just cracked loose then screwed out fine! just do that!Hmm, i got locktite-superglue, but no loctite-threadlock and i dont know if i have the time to buy it, i wanna ride asap, think i`ll try loctite-superglue.The disc came loose last time with loctite-threadlock. Quote Link to comment Share on other sites More sharing options...
Barbra Posted February 19, 2007 Report Share Posted February 19, 2007 i had the same problem, but i just tightened mine up nice and tight and it never came loose again. None of that locktite malarky. Quote Link to comment Share on other sites More sharing options...
Greetings Posted February 19, 2007 Report Share Posted February 19, 2007 Superglue? would it work? wouldnt damage anything?don't use glue on the threads, glue the screw to the disc Quote Link to comment Share on other sites More sharing options...
basher Posted February 19, 2007 Report Share Posted February 19, 2007 Yeah quite a bit but i bought new bolts and now its fine, if you buy new bolt buy Allen key bolt as there less pron to round offcheers tyler .You may want to rethink that, the name torx gives it away alittle that you can use more torque on them so you can get them tighter as they are less likely to round off. Like everyone else said loctite is a easy way of solving it. Or get decent tool and tighten them up tight dont use the crappy tool that usual comes with it. Quote Link to comment Share on other sites More sharing options...
Krisboats Posted February 19, 2007 Report Share Posted February 19, 2007 You may want to rethink that, the name torx gives it away alittle that you can use more torque on them so you can get them tighter as they are less likely to round off. Like everyone else said loctite is a easy way of solving it. Or get decent tool and tighten them up tight dont use the crappy tool that usual comes with it.Ha ha, i was going to say something about allen key bolts being super easy to round.My disc has never come loose. Get a T25 drill bit, place it in one of them interchangeable headed screwdrivers with a rubber handle, put your gloves on, twist as hard as you can.My T25 drill bit has been twisted round slightly (its like a spiral now ) without even a hint of the bolts rounding. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.