Jed Posted February 12, 2007 Report Share Posted February 12, 2007 Hi, I am going to be stripping a frame of paint soon, has anyone got any tips of what what to look out for and what products to use.Cheers, Jed. Quote Link to comment Share on other sites More sharing options...
ben.richardson Posted February 12, 2007 Report Share Posted February 12, 2007 nitromors is a paint stripper that can strip up to 15 layers of paint . It costs about a fiver a tin i did my forks with it , You just brush the nitromors onto the frame and after about 5-10 seconds it will start to buble up , the paint goes all crumbly and just simp;y wipe it off with some tissue. Its great stuff mate just don't get any on yours hands or skin because it will eat it away fast!!! Wear protective gloves and don't put too much of the stuff on as its juat a waste it only takes a light brushing for it to strip the paint. There is always the alternative,sandpaper but it will take quite a while. nitromors ***! Quote Link to comment Share on other sites More sharing options...
samo Posted February 12, 2007 Report Share Posted February 12, 2007 nitromors ***! Quote Link to comment Share on other sites More sharing options...
Jed Posted February 12, 2007 Author Report Share Posted February 12, 2007 Cheers for the replys! Do you know where about's i can get some?Jed. Quote Link to comment Share on other sites More sharing options...
Tailz222 Posted February 12, 2007 Report Share Posted February 12, 2007 Cheers for the replys! Do you know where about's i can get some?Jed.Halfords do it, or any DIY store really dude. Quote Link to comment Share on other sites More sharing options...
t-liteboy Posted February 13, 2007 Report Share Posted February 13, 2007 hi mate get some kind of blow lamp or heat gun that will help you scrap it off, plus it takes a long time i was doing it on my old onza t-pro i fort stuff this it was taking to long, hope this helps.cheers.jake(Y) Quote Link to comment Share on other sites More sharing options...
Krisboats Posted February 13, 2007 Report Share Posted February 13, 2007 nitromors is a paint stripper that can strip up to 15 layers of paint . It costs about a fiver a tin i did my forks with it , You just brush the nitromors onto the frame and after about 5-10 seconds it will start to buble up , the paint goes all crumbly and just simp;y wipe it off with some tissue. Its great stuff mate just don't get any on yours hands or skin because it will eat it away fast!!! Wear protective gloves and don't put too much of the stuff on as its juat a waste it only takes a light brushing for it to strip the paint. There is always the alternative,sandpaper but it will take quite a while. nitromors ***!It doesnt eat it away fast. It doesnt even really eat it away. I didn't use gloves when i did my maggie slaves and held the things while applying copious amounts of nitromors, went all over my fingers. Only thing that happened is when there was nitromors and flakes of paint on my hand it stung a bit where the specks of paint were. Quote Link to comment Share on other sites More sharing options...
Guest Posted February 13, 2007 Report Share Posted February 13, 2007 It doesnt eat it away fast. It doesnt even really eat it away. I didn't use gloves when i did my maggie slaves and held the things while applying copious amounts of nitromors, went all over my fingers. Only thing that happened is when there was nitromors and flakes of paint on my hand it stung a bit where the specks of paint were.Better having them think it does hurt and wear gloves than think it's doesn't and end up f**king up their skin?Just wear gloves and then all is good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.