george_seamons Posted January 30, 2007 Report Share Posted January 30, 2007 Thanks to a new frame, I need some help with some 4 bolt adaptors I'm going to have to make.I need to know the thread size of the bolt that vee brake mounts screw into. Not the thread of the bolt, I know that's M5. But the one of the actual boss. Apparently Bigman knows, so hopefully somebody else will see this topic that also knows.Thankings Quote Link to comment Share on other sites More sharing options...
ogre Posted January 30, 2007 Report Share Posted January 30, 2007 eh wa? you wanting to make vee adapors for 4bolts? (wasn't very clear to me ) why not get the onza ones there probably dirty cheap+available en-mass on ebay when the newbies sell em off when they get maggies Quote Link to comment Share on other sites More sharing options...
Janson Posted January 31, 2007 Report Share Posted January 31, 2007 google told me M10x1,5....source 1though on another page, i found bolts to screw in to fill the hole, avaliable in both 8mm and 10mm...scroll down a bit.. Quote Link to comment Share on other sites More sharing options...
george_seamons Posted January 31, 2007 Author Report Share Posted January 31, 2007 Thankyou, you're a star Quote Link to comment Share on other sites More sharing options...
Fishy Posted January 31, 2007 Report Share Posted January 31, 2007 Bigman made his own adapters, might be able to get info off him also? Quote Link to comment Share on other sites More sharing options...
Bigman Posted January 31, 2007 Report Share Posted January 31, 2007 The boss thread size is M10 x 1.25 which is a b*****d of a size as it is not a very common size, fortunatly my grandad has most things so i was able to get it.If you get stuck i have some home made ones here i would lend you to get you going.......Adam Quote Link to comment Share on other sites More sharing options...
CurtisRider Posted January 31, 2007 Report Share Posted January 31, 2007 just realised george, i could lathe up some new bosses, and then can cut a thread so that the bosses are a normal size if you like? its a piece of piss!why do i forget i have a lathe? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.