trialsguru Posted January 29, 2007 Report Share Posted January 29, 2007 im thinking about trying a longer stem but i run standard clamp bars and cant find any stems to fit, i want a stem that 130mm x 15degree rise the same as the low hifi one or maybe even 120mm.i dont want to spend a fortune though.can anyone help? Quote Link to comment Share on other sites More sharing options...
Davetrials Posted January 29, 2007 Report Share Posted January 29, 2007 medium sized low hifi stem. Quote Link to comment Share on other sites More sharing options...
Nick Garland Posted January 30, 2007 Report Share Posted January 30, 2007 (edited) As your run standard clamp bars, this should do the job, cheap but it comes in 130x35 which is similar to a hifi stem or 120 x 20 as well. Quite a few options for you there.http://www.chainreactioncycles.com/Models.aspx?ModelID=17332 Edited January 30, 2007 by Team War Rider Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted January 30, 2007 Report Share Posted January 30, 2007 That one only fits with Headshox steerers Theres a lot of stems around you could try - have a look for a Profile Stiffy, I had one a while back and it was super, loads of options on sizes too.Ads Quote Link to comment Share on other sites More sharing options...
Bruce Posted January 30, 2007 Report Share Posted January 30, 2007 I have a try-all stem for sale. I think its 100mm with 15o rise. Standard clamp size (28.4mm or whatever it is lol) If thats any good to you let me know.Link to thread.Bruce. Quote Link to comment Share on other sites More sharing options...
Greetings Posted January 30, 2007 Report Share Posted January 30, 2007 (edited) Pay for postage and I'll happily send you a 25.4->31.8mm steel sleeve. It just needs to be cut in half so you can get it around your bars.Here we go: Edited January 30, 2007 by Inur Quote Link to comment Share on other sites More sharing options...
montyrider Posted January 30, 2007 Report Share Posted January 30, 2007 yeah i'd just use a shim/ sleeve! but make sure its aluminium as it will hold the bar better since its a soft metal plus it wont corrode like steel! Quote Link to comment Share on other sites More sharing options...
RobinJI Posted January 30, 2007 Report Share Posted January 30, 2007 If you're really set on the 25.4 bars and that length stem, then theres always the Thomson. Comes in 120 by 15.Shim might be a good idea though, as theres a good chance you'll be wanting to use 31.8mm bras at some point. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.