paulbell123 Posted January 4, 2007 Report Share Posted January 4, 2007 (edited) hi there i have got a mission prodigy and drop outs are 14mm and iv got a back wheel siting around in me shed and its 10mm axle so dose anyone know how to put the wheel in to the drop outs thanks Paul Edited January 4, 2007 by paulbell123 Quote Link to comment Share on other sites More sharing options...
Fixed Pants™ Posted January 4, 2007 Report Share Posted January 4, 2007 Me thinks you can get 10mm to 14mm axle adapters for BMXs, check out AlansBMX (google it as i can't be bothered...)for them, not sure if it's 10-14 or 14-10... Quote Link to comment Share on other sites More sharing options...
Mark W Posted January 4, 2007 Report Share Posted January 4, 2007 It's 10->14mm, on account of 14->10 being impossible, unless they sold you a file But yeah, they do make them. There's a load of different versions around. I think Supercycles had some too, 'cos I had a set ages ago. They were just like a cylinder with threads on the inside and threads on the outside, with a 6mm allen-key hole machined into the end so you could hold them in place. Worked really well Quote Link to comment Share on other sites More sharing options...
liam_thornton Posted January 4, 2007 Report Share Posted January 4, 2007 Or you could just use washers, because that what my mate had to do and it worked finehope that helps Quote Link to comment Share on other sites More sharing options...
paulbell123 Posted January 4, 2007 Author Report Share Posted January 4, 2007 thanks for the help Quote Link to comment Share on other sites More sharing options...
mbuk Posted January 4, 2007 Report Share Posted January 4, 2007 Hi there yes you can by converters from alansbmx.com because i was looking at them today in the shop thanks shane. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.