will_zooboy! Posted January 1, 2007 Report Share Posted January 1, 2007 Hi thereGot my zoo! python for Xmas n learned how to wheel switch on roughly bout 22" but every-time i switch to my back wheel i can never keep the front wheel up, Any suggestions?? Comments pleaseCheers, Will Quote Link to comment Share on other sites More sharing options...
GyTrials Posted January 1, 2007 Report Share Posted January 1, 2007 have you tried stopieing the front wheel rather than locking up i find that this helps a lot unless our on a rail then brute force nees to come into play Quote Link to comment Share on other sites More sharing options...
Phill_Monks Posted January 1, 2007 Report Share Posted January 1, 2007 i found i did that on my gu, try swaping it quicker...it helped me phill Quote Link to comment Share on other sites More sharing options...
eskimo Posted January 1, 2007 Report Share Posted January 1, 2007 I think the problem is your swapping wheels to late so when you hop there is no momentum left.I mean when on the front wheel reach the balance point on the front wheel and just as it drops then go for the swap. Don't be too late otherwise that momentum of the wheel droping will be too much therefore your front wheel droping. You could try just putting in that little bit of a pedal kick after to bring the front end back up.Also if there is enough room go at an angle if you can. There will less distance for your back wheel to travel. Quote Link to comment Share on other sites More sharing options...
flas12345 Posted January 1, 2007 Report Share Posted January 1, 2007 hiwhen i wheel swop i just use all my strenth to keep the front wheel up but whilst doing this put a hard kick in and the front wheel should just lift up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.