Conor the basher. Posted December 24, 2006 Report Share Posted December 24, 2006 (edited) Hi there im a bit stuck, i had a ride on my mbk today and its realy nice but the maggura marta front disk brake lever reach is to far how do i adjust the reach of it thanks conor. Edited December 24, 2006 by koxx 20" 26" rider Quote Link to comment Share on other sites More sharing options...
paolo Posted December 24, 2006 Report Share Posted December 24, 2006 I personally don't have a Marta, but mostly all hydro brake are the same... under the lever blade, there should be a rod that links to the master cylinder, there should be a small hex slot where that rod links with the lever blade... A picture would be betterThe red thingy I marked, there should be some thing similar on your lever, chances are it won't be as exposed as on the El Camino I used to demonstrate... Quote Link to comment Share on other sites More sharing options...
Fishy Posted December 24, 2006 Report Share Posted December 24, 2006 Or there is a cap on the front of the lever, and if you pop open the cap there is a 2.5/2mm allen bolt. just play about with it until you like Quote Link to comment Share on other sites More sharing options...
Conor the basher. Posted December 24, 2006 Author Report Share Posted December 24, 2006 Thanks i have got it now. how long dose it normaly take for one to bed in ? Quote Link to comment Share on other sites More sharing options...
26inch Posted December 24, 2006 Report Share Posted December 24, 2006 To bed it in ride around with it dragging, down a hill or something to get it really hot then while its hot pour cold clean water all over the brake, repeat this about 3 times and you brake should be mint Quote Link to comment Share on other sites More sharing options...
Conor the basher. Posted December 25, 2006 Author Report Share Posted December 25, 2006 Ok i will try that . dont that glaze you pads though? Quote Link to comment Share on other sites More sharing options...
Guest Posted December 25, 2006 Report Share Posted December 25, 2006 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.