Wright Pads Posted October 31, 2006 Author Report Share Posted October 31, 2006 Any chance of a set Pete? After all, you have used my gluing info and material! Would be good to see how you've improved the gluing from mine too, even with only 2mm of recess.AdamHey dude. I have a few sets ear marked for you, Dave as he's a gem on the phone and any other's there you wana let have! 4mm receess Adam, 4mm! oh right so they are just the pads thenNo, right the sheet was 300x300x10, cut that into 50x300x10mm blocks, then each block will be cut into 50x12x10mm blocks, then they will get cut into the Magura pad shape to fit the Power Pad backing and glude in. So a lot more than meets the eye! Stay tunned is all i say!Pete i will have a set off you next time i ride plymouth.No worrise dude. Shall be sorted soonPete Link to comment Share on other sites More sharing options...
AdamR28 Posted October 31, 2006 Report Share Posted October 31, 2006 Hey dude. I have a few sets ear marked for you, Dave as he's a gem on the phone and any other's there you wana let have! 4mm receess Adam, 4mm! Awesome, cheers Ah ok, just I had it down as a 10mm thick sheet with 8mm of pad material.. making 2mm recess? Either way, 4 is good! Link to comment Share on other sites More sharing options...
Wright Pads Posted October 31, 2006 Author Report Share Posted October 31, 2006 (edited) Awesome, cheers Ah ok, just I had it down as a 10mm thick sheet with 8mm of pad material.. making 2mm recess? Either way, 4 is good!4mm is what he backing depth is and i get a ful bond on all side's etc on the inner of the backing. I snaped a slave with these pads, one of the tabs where the pads rests! Well 2 in fact as my current has a crack in there now! Drop me a txt if you want Adam or an e-mail what ever is best! Edited October 31, 2006 by Wright Pads Link to comment Share on other sites More sharing options...
Recommended Posts