Jump to content

Yup, Ive Gone And Done It As Well.....


Prawny Baby

Recommended Posts

ok, so as the title says......

i was LOVING the ashton so much, my riding was better than it had been for ages in most respects, but i COULDNT tap it at all. the highest i made on the ashton ever was 47'', but it was total fluke, and generally 42'' felt like a good height on it :S which is not funny.

my mind was made up on the plymouth ride a month ago, when i was out tapped by ash kennard :S (surely thats enough to make anyone want to quit?)

so the decision was made.

a zenith was purchased.

not the typical barge most people are riding these days, but still, a good bit longer than the ashton.

[attachmentid=7253]

[attachmentid=7254]

she measures up at a fraction under 1080 with Urban forks, with a BB rise i cant quite decide :P

its +27mm compared to the rear axle, and + 31 compared to the front wheel, so i guess that averages out at +29, and it does feel about spot on!

reach is 675mm, which is technically the same length as the ashton, because if you move the measurement up on the ashton frame to the BB height of the zenith, it becomes 675.., so the horizontal reach is the same.

it rides REALLY nicely, sidehops and gaps feel much easier. ive yet to do too many taps, as i cant find any around my house, but ive done one around 42-43'' and it does feel a whole load nicer.

all in all, im happy!

and at £200 with a fre king headset, its a BARGIN.

i did expect it to be a little cheapy made, but the welding looks as good as any frame ive had, and its got all the CNC work of the Koxx XTP. and its made from the same 7005 as the ashton, so no worries there.

im chuffed to bits!

post-168-1159385001_thumb.jpg

post-168-1159385018_thumb.jpg

Link to comment
Share on other sites

btw you selling your ashton lol?

yup, after a short little ride today, this beats the ashton in every way, i can even manual it better, as i can control the front better, being a little longer!

i really didnt expect is to be anywhere near as good as it is, for such a stupidly cheap price!¬

i heard the colour was rancid, and to be honest, the graphics are HORRIBLE. but once ive stickered them over, its going to look awesome, and i really like the met black.

the ride really does feel spot on, within a few minutes it felt like my own bike, and once ive taken it for a ride in town ill post up a vid :)

the uci thing got stale years ago for me.....

im just too big, and too used to the uci scene for the street style of the ashton.

this feels like the PERFECT blend of both.

short enough to still mess around and be smooth and stylish, but long enough for the kind of trials moves i enjoy!

im loving it so far!

shame i bent my hope rotor riding on a rail :angry:

edit- yes the ashton is for sale, its in basicly MINT condition, although the left chainstay has no paint :(

i scrathched it onh a few sidehops a while back, and sanded the paint offf the bottom edge with a veiw to respraying it to look nice again, although its actually hardly got a proper mark on it.

Link to comment
Share on other sites

very nice, almost as nice as mine :P

told you you'd like it!!!

also, why you using a booster? my brake is as stiff as something very stiff without a booster on!

wooo

Will

using a booster currently, becuase like you will, i dont have any short bolts, and yours looks wrong with booster length bolts and spacers but no booster ;)

although, with a huge CNC brake mount, AND a heatsink UBERbooster its a little stiff......

Link to comment
Share on other sites

i loved the ashton too guys, but i was riding the two ashton frames i had from march through to 2days ago (7 months total) and i never figured out how to tap it properly.....

i was making a reasonable height consistantly, but i could NEVER progress higher than that, the one time i did was total fluke.....

it just didnt seem togel with ti as far as tapping goes....

everything else was amazing on it, but it got to the point that going on rides was depressing because i was being out tapped by people like kennard!

the zenith does seem to be perfect from initial impressions.

Link to comment
Share on other sites

Sounds good, and the prawn stickers would make it!

reach is 675mm, which is technically the same length as the ashton, because if you move the measurement up on the ashton frame to the BB height of the zenith, it becomes 675.., so the horizontal reach is the same.

Now not meaning to burst your bubble, but I think I know someone who'd disagree if he could ever get out of NMC... :-

What position were your cranks in at the time?!

(For everyone else, I'm not just a complete retard. Well, I am, but I know Prawn is actually Wright....)

Glad you like it though, looks like it'll really bring out the colour in your eyes ;)

Look forward to seeing it sometime

Link to comment
Share on other sites

my mind was made up on the plymouth ride a month ago, when i was out tapped by ash kennard :S (surely thats enough to make anyone want to quit?)

cheeky f**k, ive been tapping/riding awesome recently.

but anyways, tht looks like a fine steed, and i will be having ago on it in the not to distant future.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...