Fvil Posted September 2, 2006 Report Share Posted September 2, 2006 (edited) I just notice that my chain moves in and out(towards the wheel) when i spin the crankscould this be the Axel is a little bent orthe Taper is worn down ormy crank is loose Help me every onethanks a millionEDIT: it basically wobbles in the Freewheel area!!! which causes the chain to move in n out Edited September 2, 2006 by ffdevil Quote Link to comment Share on other sites More sharing options...
python_man Posted September 2, 2006 Report Share Posted September 2, 2006 its your freewheel. There is nothing wrong with it lots of freewheels do it my friends eno even does it. The only freewheel i've had that doesn't do it is my tensile freewheel theres nothing wrong its all good (Y) Quote Link to comment Share on other sites More sharing options...
_CRED_ Posted September 2, 2006 Report Share Posted September 2, 2006 Your freewheel might be loose.My ACS used to wobble if it was loose. Quote Link to comment Share on other sites More sharing options...
Fvil Posted September 2, 2006 Author Report Share Posted September 2, 2006 are you sure?my freewheels is pretty Newplus i took the crank off to look at itand it didnt seem there was anythin rong with it!!!! Quote Link to comment Share on other sites More sharing options...
python_man Posted September 2, 2006 Report Share Posted September 2, 2006 its to do with the bearings i think . there is nothing wrong with it it is just the way it runs its good though Quote Link to comment Share on other sites More sharing options...
Fvil Posted September 2, 2006 Author Report Share Posted September 2, 2006 (edited) Your freewheel might be loose.My ACS used to wobble if it was loose.Naaaa tensile Freewheel (none faulty) EDIT: so it not the Axel being bent Edited September 2, 2006 by ffdevil Quote Link to comment Share on other sites More sharing options...
_CRED_ Posted September 2, 2006 Report Share Posted September 2, 2006 (edited) my freewheels is pretty New It might be the bearings bedding in? If your axel was bent your crank would wobble. Just tighten up your bb, freewheel and your cranks and if it still wobbles it will be the freewheel bearings. EDIT:Also check the square taper for damage. Edited September 2, 2006 by _CRED_ Quote Link to comment Share on other sites More sharing options...
Fvil Posted September 2, 2006 Author Report Share Posted September 2, 2006 (edited) Good point *I m just soo tired, i cant think* thanksany more opinions are VERY welcomed :Help:EDIT: tired after a GD day of ridein of couse Edited September 2, 2006 by ffdevil Quote Link to comment Share on other sites More sharing options...
Si-man Posted September 2, 2006 Report Share Posted September 2, 2006 even if it's new it will still work its way loose.Take the freewheel apart and put some threadlock on the threads and tighten it up good, leave for a day or so for it to harden fully and you should be ok then Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.