Jump to content

Condition Zero Problems.....


Mr_Pitbull

Recommended Posts

Basically my CZ isnt running as smoothy as it should, i lag out on occasions and CL_flushentrypacket sometimes flashes up in the screen....my mate "Echo-scotty" had similar problems.....

my rate is 9999.0000 which is insane, it should be 2500 on average? any chance of being able to speed up my CZ, anything i can change etc etc.........without buying new hardware.....

Computer people please help as im a little ignorant when it comes to knowledge of computers of this basis....

Adamm please help lol

Link to comment
Share on other sites

From what I remember... It depends on what connection your running. If it's over 512mb your rate is to low. Try these commands in the console

Rate 22000

cl_updaterate 101

cl_cmdrate 101

toggle them between

rate 20000 - 28000

cl_updaterate 80 - 127

cl_cmdrate 80 - 127

helps if you have cl cmdrate and updaterate the same.

You can always go on steam forums and download other peoples config files.

Edit 2500 is default but it's not average.

Edited by Adamm
Link to comment
Share on other sites

From what I remember... It depends on what connection your running. If it's over 512mb your rate is to low. Try these commands in the console

Rate 22000

cl_updaterate 101

cl_cmdrate 101

toggle them between

rate 20000 - 28000

cl_updaterate 80 - 127

cl_cmdrate 80 - 127

helps if you have cl cmdrate and updaterate the same.

You can always go on steam forums and download other peoples config files.

Im running 1meg, when i first booted my computer it was all working smoothly......i have a pretty decent graphics card aswell. my internet explorer is playing up though its really really slow....

Rate 22000

cl_updaterate 101

cl_cmdrate 101

toggle them between

Do i type all that in the console on each game, including Rate 22000or just the bottom 2.

Link to comment
Share on other sites

:D thanks for the help (Y):wub:

I'll see if theres any major difference next time i play. Will post back tonight. if problem occurs is may be something to do with my internet connection....or possibly the ammount of programs that are running in processes when i do Ctrl + Alt + delete......

I dont know how to stop them i think many of them may be spyware?

Link to comment
Share on other sites

Get spyware doctor to give your comp a good scan for spyware and other crap. How many processes have you got running in your task manager? Also, click on the performance tab and you can see how much work your CPU is doing and how much memory is being used.

Go here and here where you can check what each running process is. End the ones you don't need running.

Link to comment
Share on other sites

When it's running, Ctrl+Alt+Delete ---> Processes ---> Right click and click 'Priority' on the menu and select 'High' or whatever. I was thinking of something else when I said low, w00ps.

If that doesn't work. Buy CSS :rolleyes:

I have CSS, so are you telling me to run it on High?????? or Low

Link to comment
Share on other sites

Theres nothing you can do to stop cl_flushentypackets.

Say your running Long A on Dust2, so many packets get sent back and forth along the way and are getting lost. eather you have a gap in your connection where there getting lost or your nets playing up.

rates set up your connection to allow you to " reg " fine on the game and can help slightly with lag.

Could be alot of spyware on your computer.

Rates from::

16000 - 60 60 lowest.

25000 - 101 101 higest. these are LAN rates for a reason and only used for high spec PCs.

Edited by Echo_Scotty
Link to comment
Share on other sites

Lost packets is definitely a connection problem. Are you running wireless? if so check your signal strength if it anything below the max out/input then there is your answer. If you are running direct you need to check your download speed a few times to see what your download speed is running at. If it isnt running to its full potential then id take a look at some connection optimiser.

If none of this helps try running your desktop resolution lower for example from 1680*1050 down to 1070 etc..also then lower the ingame res and run it in a window. Type in console net_graph 3 and check your choke and packet loss if you have anything over say .. hmm 10? then you have some big problems. You should only really be losing 1-3 max

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...