Dipping And Spraying.

[Danny Kearns]

Hello, Could anyone please tell me ruffly how much it will cost to have my zona zip frame, dipped and then sprayed ?

Dan.

[sir trial a lot]

I could probably do it for you. Probably cost around £20 +postage.

[Tom Booth]

Dipped?

Just spray it yourself, go to halfords, don't they do some 3 for 2 on there paint range? Pick up a primer (depending n the colour of your top coat pick a suitable primer, that is if halfords stock the varieties) Get your colour, and a clear laquer.

Lightly sand the frame, 1 coat of primer, don't go mad just yet. A really nice thin coat, wait until its dry, sand it lightly again, next coat and repeat this about 4 times. Wait until the primers dry/hard then sand slightly and put your top coat on. Again lightly sanding inbetween coats. Usually 4-5 coats is plenty. After your 3rd coat (if your doing 5 coats) stop sanding inbetween coats, and just apply the paint.

Then laquer, 2-3 coats of this using the same method as your paint. With no sanding.

Apply the paint in a stroke, about 20 cm's away from the frame, from left to right. Don't spray in blobs where you've missed a section just spray across it a few times

Tom

[bhups]

You could get it powder coated from iolo?

[sir trial a lot]

I wasnt very clear in my first post, For the £20 i would powder coat it

[Gavyn.]

if your refering to my post in the other topic take it to your local garage they will do it for around 15 quid which is better than buying nitromorse, paint and laquer