' Mart ' Posted July 9, 2006 Report Share Posted July 9, 2006 i recently swapped my monty 221 ti for an onza zoot,but i wanna get a new rear wheel so i was thinkin of gettin an echo fixed rear hub,but i have a question would a freewheel screw onto this hub, as id run an eno on the rear and my tensiles up front,Link To Hubwould the gearing be affected at all as im running 22 front 14 rear but what would 22 front 18 rear be like??thanks for any helps cheers Quote Link to comment Share on other sites More sharing options...
' Mart ' Posted July 9, 2006 Author Report Share Posted July 9, 2006 i had an idea would i be able to run a front freewheel system on a 26",if i take the 22 tooth cog off the front and run an 18 tooth eno, what sort of sized rear sprocket sould i be looking at on the rear.thanks. Quote Link to comment Share on other sites More sharing options...
_skj0lsvik_ Posted July 9, 2006 Report Share Posted July 9, 2006 i had an idea would i be able to run a front freewheel system on a 26",if i take the 22 tooth cog off the front and run an 18 tooth eno, what sort of sized rear sprocket sould i be looking at on the rear.thanks.You should be looking for a 16, 15 or 14.I'm currently on a 16t and I find it way too spinny, I would have gone for a 15t. Quote Link to comment Share on other sites More sharing options...
adamtrials Posted July 9, 2006 Report Share Posted July 9, 2006 Hub + Eno + wheelbuild = enough for pro 2 or secondhand king...if you really want an eno on the rear get a dmr revolver singlspeed,they are cheaper and work well. Quote Link to comment Share on other sites More sharing options...
Dan6061 Posted July 9, 2006 Report Share Posted July 9, 2006 A freewheel will screw onto the hub. Says so inthe description. Description - Fixed rear 26" hub from Echo. - 135mm axle spacing fit all modern 26" trials frames. - Includes 15mm Low-Profile Hollow Stainless Steel Allen Key bolts. - Large diameter fully sealed cartridge bearings (like Chris King), with a 7075 CNC machined 15mm axle for maximum strength:weight ratio! - High grade 6061-T6 CNC Machined hub shell. - Threaded section ready to fit a freewheel or fixed sprocket. 15 or 16T recommended for 18T front freewheel - Super wide flange spacing offers the strongest wheelbuild possible. - Available in Black, Silver, Red, Blue, Green and Gold! - 32h only. - Weight: 227g including bolts and washers! Quote Link to comment Share on other sites More sharing options...
Josh Greenan!!!!!!!!!! Posted July 9, 2006 Report Share Posted July 9, 2006 Hey mart, Get a front freewheel jonny at liecester has got one and it works great. Quote Link to comment Share on other sites More sharing options...
' Mart ' Posted July 10, 2006 Author Report Share Posted July 10, 2006 was thinkin about tht josh run an eno up front and a 15t rear sould be work i hope cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.