Toni-J Posted July 7, 2006 Report Share Posted July 7, 2006 I cracked my XTP frame and would like to put in its place a MBK T1000 frame.I would like to know if the BB and Headset can be taken off the XTP frame and used for the T1000.The XTP BB shell width is 68mm and the T1000 is 73mm, can this still work?I don’t know what type of headset the XTP has apart from it’s whatever came standard, and from Tarty Bikes the headset for the T1000 reads “steel internal 'hidden' Cane Creek headset” I don’t know what internal and hidden mean but it sounds unique and possibly incompatible.I don’t know much I’m sorry, but it would mean a lot if someone can clear things up for me.Thank you Quote Link to comment Share on other sites More sharing options...
MrSuave Posted July 7, 2006 Report Share Posted July 7, 2006 73 + 68 - no worky....XTP's are external headset, if the MBK is internal you need a new one of them too......and not being funny, but this is all obviously coming from tarty, so why dont you just ring them?? they know all! Quote Link to comment Share on other sites More sharing options...
Joe Papasnap Maher Posted July 7, 2006 Report Share Posted July 7, 2006 MrSuave said: 73 + 68 - no worky....XTP's are external headset, if the MBK is internal you need a new one of them too......and not being funny, but this is all obviously coming from tarty, so why dont you just ring them?? they know all! People are scared to talk on phone nowdays Quote Link to comment Share on other sites More sharing options...
ogre Posted July 7, 2006 Report Share Posted July 7, 2006 JoeMaher said: People are scared to talk on phone nowdays to true Quote Link to comment Share on other sites More sharing options...
_skj0lsvik_ Posted July 7, 2006 Report Share Posted July 7, 2006 I'm scared to talk on phone. When the phone rings I usually run and hide under my bed. Quote Link to comment Share on other sites More sharing options...
sUm Posted July 7, 2006 Report Share Posted July 7, 2006 Toni-J said: The XTP BB shell width is 68mm and the T1000 is 73mm, can this still work?Check your actual bottom bracket, I wouldn't be surprised if it was actually a 73mm with spacers to fit a 68mm shell. If this is the case the all you'll have to do is chuck the spacers away and it'll fit just fine. Quote Link to comment Share on other sites More sharing options...
Stan Shaw Posted July 9, 2006 Report Share Posted July 9, 2006 The MBK comes with a headset to fit it, so no need to worry about that.You can run a 68mm BB in a 73mm shell, just means your left hand cup screws further in. Seen it done, and done it myself for abit. Quote Link to comment Share on other sites More sharing options...
Prawny Baby Posted July 9, 2006 Report Share Posted July 9, 2006 cultiv8ed stan said: You can run a 68mm BB in a 73mm shell, just means your left hand cup screws further in. Seen it done, and done it myself for abit. same here, its no big deal at all! as long as the axle is long enough you can also run a 73bb in a 68 shell no trouble either,it just doesnt screw in the whole way, i ran my px like that for a year Quote Link to comment Share on other sites More sharing options...
Nick Garland Posted July 9, 2006 Report Share Posted July 9, 2006 Phone tarty up, they are extremley helpful and customer service is top notch. Always try to order from there if they sell what I need, even if its abit more. but everyone is saying you cant put a 73 into a 68, well you can, you just need to use spacers. I cant remember the name of the company that does this as they sell one bb for 73 and 68mm and they provide a spacer for a 68mm bb so it clamps propely. I think is truvativ. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.