Clownbike Posted June 21, 2006 Report Share Posted June 21, 2006 (edited) i'm running an old(ish) echo fixed hub with an ACS and kmc chain.This hub means i have to use the lil M6 bolts (allen key), not the hexagonal bolts.I set up the wheel, tighten the bolts very tight, but a few minutes of riding and the chain becomes slack. is there anything i can do to help this not to happen??Neilps i have tugs, but they dont fit Edited June 21, 2006 by Clownbike Quote Link to comment Share on other sites More sharing options...
the judge Posted June 21, 2006 Report Share Posted June 21, 2006 Perhaps try some of the snail cams with the notches on them Quote Link to comment Share on other sites More sharing options...
bEavoLa Posted June 21, 2006 Report Share Posted June 21, 2006 ps i have tugs, but they dont fitget tugs that DO fit? Quote Link to comment Share on other sites More sharing options...
the judge Posted June 21, 2006 Report Share Posted June 21, 2006 get tugs that DO fit? I think it's due to the design on many of the new mods now, the dropouts are just too small for any tugs to fit Quote Link to comment Share on other sites More sharing options...
Egg Fried Rice Posted June 21, 2006 Report Share Posted June 21, 2006 or is it a new chain and its still streching?thanksJohn Kan the china man Quote Link to comment Share on other sites More sharing options...
poopipe Posted June 22, 2006 Report Share Posted June 22, 2006 snail cams are the way to go i recommend the steel ones from tarty - the ones without teeth. Quote Link to comment Share on other sites More sharing options...
Houseface Posted June 22, 2006 Report Share Posted June 22, 2006 neil, have you actually used the snail cams or just let them hang around? if you want me to come up and help after school today i can.just give me a ring about 3:40 steve. Quote Link to comment Share on other sites More sharing options...
tom tom Posted June 22, 2006 Report Share Posted June 22, 2006 i have some echo snail cams and they dont fit anything but my echo hub, plus they have to go almost all otf the way around untill they do anything as they are very small.but i have resorted back to my profile so i dont have this problem anymore as i use manly snail camstom tom Quote Link to comment Share on other sites More sharing options...
weebryan Posted June 23, 2006 Report Share Posted June 23, 2006 (edited) I have the try-all snail cams and my wheel always pulls to the left because of the drive and causes my chain to go slack dont know how to stop it Edited June 23, 2006 by weebryan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.