Jump to content

Making New Magura Crossovers


King C

Recommended Posts

From a request made by a new member I've decided to share my method of making magura crossovers.

My weapns of choice:

Pliers, lighter, an old magura slave cylinder, hose clamps and vice.

IPB Image

Step one: Cut the hosing dow to about 23cm.

Step two: Put one end of the hosing in the hose clamps and then into the vice. Leave about 1-1.5cm sticking out.

IPB Image

Step three: screw the nipple into the old slave cylinder and hold like this:

IPB Image

Step four: ignite the lighter with the other hand and wave slowly it across the tip of the exposed hosing for around 2 seconds.

IPB Image

IPB Image

Step five: then grasp the cylinder and start to push the nipple onto the hosing

IPB Image

Don't I have lovely hands :-

If the hose collapses into a "N" shape it means that the hose is too hot.

Et viola:

IPB Image

Who likes the Ghetto clear hosing? :P This way you know if you have air bubbles in the system.

IPB Image

BTW I dont really know how to upload pictures and have sort of bodged the uploading. Thats why when you click on the images It says Error.

Edited by kcchan
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...