benno Posted June 6, 2006 Report Share Posted June 6, 2006 (edited) Does anyone know where I can find a technical drawing and stuff of an IS disc mount? I need to have a crack at drawing a +30mm adapter... Edited June 6, 2006 by benno Quote Link to comment Share on other sites More sharing options...
adamtrials Posted June 6, 2006 Report Share Posted June 6, 2006 Look at the bottom of the page, there are several different types of mount info/ diagramshttp://www.hayesdiscbrake.com/support_downloads.shtml Quote Link to comment Share on other sites More sharing options...
benno Posted June 8, 2006 Author Report Share Posted June 8, 2006 Cheers dude, that's perfect Quote Link to comment Share on other sites More sharing options...
Mr Motivator Posted June 8, 2006 Report Share Posted June 8, 2006 Just incase you need to take a wide survey, theres one on the Magura site too. Quote Link to comment Share on other sites More sharing options...
Matt_Tupman Posted June 9, 2006 Report Share Posted June 9, 2006 30mm adapter what the hell rotor are you using? or is it a frame/fork with a manky disc mount? Quote Link to comment Share on other sites More sharing options...
benno Posted June 9, 2006 Author Report Share Posted June 9, 2006 I used to have koxx forxx before they came unglued (d'oh! ) which have the mounts put on so they're +30mm anyway and I ran a 190mm disc, which was great. However, on my new Urbans the mounts are in the normal position so i had to go back down to a 160mm rotor, which doesn't hold. Sooo... basically a +30mm would let me run my old rotor again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.