giantwhore Posted June 1, 2006 Report Share Posted June 1, 2006 AS above reallyAnyone know?Chris Quote Link to comment Share on other sites More sharing options...
downhill_rob2@hotmail.com Posted June 1, 2006 Report Share Posted June 1, 2006 Yeah, but you wont need the axel to be that long...I dont know what size you will need exactly, but around 118mm should do... i think... Quote Link to comment Share on other sites More sharing options...
Bigman Posted June 1, 2006 Report Share Posted June 1, 2006 I think in a control it would be tight with a 122.5mm, it would be best of getting a 128mm one 68mm shell remember too Adam Quote Link to comment Share on other sites More sharing options...
Ali C Posted June 1, 2006 Report Share Posted June 1, 2006 pah, I used a 118mm bb with my control, that was with tensile cranks and 18 tooth bash, there was plenty of room. Quote Link to comment Share on other sites More sharing options...
Bigman Posted June 1, 2006 Report Share Posted June 1, 2006 pah, I used a 118mm bb with my control, that was with tensile cranks and 18 tooth bash, there was plenty of room.That was with an 18t though Ali, u might squeeze a 20t in with a 118 but it would be VERY close try the 122.5 see how it goes.......Adam Quote Link to comment Share on other sites More sharing options...
Matthew_Gibson Posted June 1, 2006 Report Share Posted June 1, 2006 pah, I used a 118mm bb with my control, that was with tensile cranks and 18 tooth bash, there was plenty of room.118mm fine for me too! But i think im running a 22tooth with Pro bash (the big one ) not sure though! Quote Link to comment Share on other sites More sharing options...
manuel Posted June 1, 2006 Report Share Posted June 1, 2006 I ran a 113 on my pure - with a 22t middleburn set - no problems. I cant remember what shell width the pure is but i had a raceface bb with the spacer on and it worked fine so im guessing with the control being similar down there a 122.5 should give you bags of room... Quote Link to comment Share on other sites More sharing options...
rich4130 Posted June 1, 2006 Report Share Posted June 1, 2006 Think its 68mm120ish sounds good to me, I have a 127mm on my pure and the is way to much clearence.Can't really have a BB too long unless you run gears though? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.