MaXsteri Posted June 2, 2006 Report Share Posted June 2, 2006 128mm i think its quite long enough thanks BB length is not the issue as the shitmano I had before and the Eno i have now work fine Quote Link to comment Share on other sites More sharing options...
ogre Posted June 2, 2006 Report Share Posted June 2, 2006 Could you put eno parts on a tensile? Quote Link to comment Share on other sites More sharing options...
MaXsteri Posted June 2, 2006 Report Share Posted June 2, 2006 I think that has already been asked, and iirc the reply was what would be the point? Quote Link to comment Share on other sites More sharing options...
downhill_rob2@hotmail.com Posted June 2, 2006 Report Share Posted June 2, 2006 I think that has already been asked, and iirc the reply was what would be the point?cheaper freewheel... then buy some bearings out of a ENO, then you 'kinda' have an eno... Quote Link to comment Share on other sites More sharing options...
Backgren Posted June 2, 2006 Report Share Posted June 2, 2006 defo can't put cartridge bearings instead of caged or loose ball ones ^^ Quote Link to comment Share on other sites More sharing options...
mat hudson Posted June 3, 2006 Report Share Posted June 3, 2006 you can with the help of a heavy goods vehicle. Quote Link to comment Share on other sites More sharing options...
PaRtZ Posted June 3, 2006 Report Share Posted June 3, 2006 uh huh.... and how many of them do you know?no mum backs Quote Link to comment Share on other sites More sharing options...
mat hudson Posted June 3, 2006 Report Share Posted June 3, 2006 quite a few go through town here. you could put the bearing ontop of the freewheel leave her in the road and when you come back it'll be inside! but nah i was joking Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 20, 2006 Author Report Share Posted July 20, 2006 Bump? And while I'm at it... Quote Link to comment Share on other sites More sharing options...
Jaffacakes Posted July 20, 2006 Report Share Posted July 20, 2006 Those maggy mounts look the shit.I could really do with some of them for the front. Im guessing the curve in them if for a bit of extra adjustment? Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 20, 2006 Author Report Share Posted July 20, 2006 Nah, just I didn't put my "Proper" lens on before I took the pics But yeah, they're offset "enough", basically Quote Link to comment Share on other sites More sharing options...
Caleb Posted July 20, 2006 Report Share Posted July 20, 2006 i take it there so people can run mavics? or is it for people who like wide rims but dont have adjustment?either way it should work Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 20, 2006 Author Report Share Posted July 20, 2006 Yeah, it should work both ways from what I can tell. I'm gonna be chucking them on my bike in a few mins so I'll try and grab some pics...EDIT: 'scuse the wanky brake setup. My rim's just right for fitting in without the offset, but I wanted to get a pic of it on bike. They work both ways though, so if you want to wider/narrower than a Try-All you're good to go. May even be able to resurrect stuff like the DX-32s and we can all rejoice in tough, light-ish rims that hold grinds Quote Link to comment Share on other sites More sharing options...
mat hudson Posted July 20, 2006 Report Share Posted July 20, 2006 oooooooooohhhhhhhhh smart mark, riding el trials bike tonight then? i wanna see how the citrus pads work!! Quote Link to comment Share on other sites More sharing options...
Bondy Posted July 21, 2006 Report Share Posted July 21, 2006 Is there a review of these freewheels yet? One which hasnt been used for about a day and is wicked because it goes click click really loud . Quote Link to comment Share on other sites More sharing options...
Walleee Posted July 21, 2006 Report Share Posted July 21, 2006 Is that a broken tooth on the comp freewheel?I like those mount's. Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 21, 2006 Author Report Share Posted July 21, 2006 The one with the dark tip? It's just a spot on marker pen I don't know why it's there, may have been to tell it apart from any 60-clickers lying around, even though the mad loud sound this freewheel makes differentiates it.Bondy - I ran my Tensile for 6 months with no problems. Skipped once or twice, but that was about it. Easy to service with the caged bearings, even though I didn't have to strip it during the time I ran it It was still going after the 6 months, it's just that they got released and I got a reconditioned Eno cheap off Edd Potts Quote Link to comment Share on other sites More sharing options...
Ali Courtney Posted July 26, 2006 Report Share Posted July 26, 2006 (edited) Yeah, it should work both ways from what I can tell. I'm gonna be chucking them on my bike in a few mins so I'll try and grab some pics...'scuse the wanky brake setup. My rim's just right for fitting in without the offset, but I wanted to get a pic of it on bike. They work both ways though, so if you want to wider/narrower than a Try-All you're good to go. May even be able to resurrect stuff like the DX-32s and we can all rejoice in tough, light-ish rims that hold grinds Any ideas when they are going to be available to buy Mark? AliEDIT: Opps, Just seen this on the site http://www.supercycles.co.uk/news.asp no ordering link yet though. Edited July 26, 2006 by ali Quote Link to comment Share on other sites More sharing options...
downhill_rob2@hotmail.com Posted July 26, 2006 Report Share Posted July 26, 2006 Care to reveiw the pads mark?I want some and maybe some clamps But, only if you reveiw them Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 26, 2006 Author Report Share Posted July 26, 2006 Until some spokes arrive for me tomorrow from Tarty so I have a rear wheel, I can't really review much. Tart told me he liked the pads but they wear out pretty quickly. Slightly harder than CRMs I'm told? Either way, I'll let you know about the pads + freewheel ASAP... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.