CBProductions Posted May 7, 2006 Report Share Posted May 7, 2006 (edited) Ok well having just been riding today I have put a fold in my rim and it's time to get a new one. Although my friend changed to the new echo rim and couldn't fit it in with his pads. [attachmentid=4440] So i'm looking for a tough rim , good with grinds and good with green cousts please? Don't say use the search as I have and it revealed nothing to help. Cheers in Advance Craig Edited May 7, 2006 by CBProductions Quote Link to comment Share on other sites More sharing options...
Joe_Elding Posted May 7, 2006 Report Share Posted May 7, 2006 Kris holm, Only £22 and 6 mil thinner than an echo rim, and heaps stronger Quote Link to comment Share on other sites More sharing options...
Will Arnold Posted May 7, 2006 Report Share Posted May 7, 2006 echo rim would work with your setup, but my cousts in cnc didn't work very well with an echo rim, gosh knows why.maybe kris holm? similar material to the koxx your running now, so if that works grind wise, then go for a kris holm Quote Link to comment Share on other sites More sharing options...
CBProductions Posted May 7, 2006 Author Report Share Posted May 7, 2006 The koxx rim had the noise and initial bite but no hold and just seemed to go out of true all the time , Quote Link to comment Share on other sites More sharing options...
Will Arnold Posted May 7, 2006 Report Share Posted May 7, 2006 The koxx rim had the noise and initial bite but no hold and just seemed to go out of true all the time ,i'd advise a dx-32, or similar, they seem top dog or maybe try an echo cnc '05 rim if you can get your mitts on one Quote Link to comment Share on other sites More sharing options...
Trials mama Posted May 7, 2006 Report Share Posted May 7, 2006 i hate to be a topic clogger, but what is a kris holm rim?? Quote Link to comment Share on other sites More sharing options...
Joe_Elding Posted May 7, 2006 Report Share Posted May 7, 2006 Unycycle.co.uk They seem hella srong from what a couple uni people i know have, it'll be my next rim fo sho. Quote Link to comment Share on other sites More sharing options...
Robwalker Posted May 7, 2006 Report Share Posted May 7, 2006 or maybe try an echo cnc '05 rim if you can get your mitts on one Good luck I tried for months. And im not sure on the dimensions of the V!Z rim but mines done pretty good!Rob Quote Link to comment Share on other sites More sharing options...
Dan@Trials-uk Posted May 7, 2006 Report Share Posted May 7, 2006 Good luck I tried for months. And im not sure on the dimensions of the V!Z rim but mines done pretty good!RobEither 42MM or 46MM width(Y) Quote Link to comment Share on other sites More sharing options...
Alun Goch Posted May 7, 2006 Report Share Posted May 7, 2006 How many grinds have you made on that rim?Alun Quote Link to comment Share on other sites More sharing options...
CBProductions Posted May 7, 2006 Author Report Share Posted May 7, 2006 Two and they werent that harsh either. Quote Link to comment Share on other sites More sharing options...
Tom Booth Posted May 7, 2006 Report Share Posted May 7, 2006 Last time i looked, Bikedock had the cnc echo's in stock Quote Link to comment Share on other sites More sharing options...
Mat Smith! Posted May 7, 2006 Report Share Posted May 7, 2006 You don't try very hard looking for an Echo rim do you?TordybikesMat Quote Link to comment Share on other sites More sharing options...
CBProductions Posted May 7, 2006 Author Report Share Posted May 7, 2006 I hope that wasn't aimed at me as I'm asking for recommendations as I've never really had that many rims and also need to watch the width on it and also find one that is suitable for a nice grind and cousts. Quote Link to comment Share on other sites More sharing options...
squince Posted May 7, 2006 Report Share Posted May 7, 2006 Is that the only dent? if so, you dont need a new rim, may as well use it till the bitter end Till its like a 50p, or just bend it out cheers andy Quote Link to comment Share on other sites More sharing options...
CBProductions Posted May 7, 2006 Author Report Share Posted May 7, 2006 It's an actual fold and is on the seam of the rim so I'd rather just replace it now while I've got the time an money to do it. Quote Link to comment Share on other sites More sharing options...
Mat Smith! Posted May 7, 2006 Report Share Posted May 7, 2006 Sorry, it was aimed at RobWalker, not in a bad way or anythin'..Yah... LolMat Quote Link to comment Share on other sites More sharing options...
PaRtZ Posted May 7, 2006 Report Share Posted May 7, 2006 kris holm is gurrrdddd The sidewall is tiny so i cant see it caving in like my ronnie Quote Link to comment Share on other sites More sharing options...
CBProductions Posted May 7, 2006 Author Report Share Posted May 7, 2006 Whats the width on it as I need room to fit the cnc pads in as well , some more comments would be lovely people Quote Link to comment Share on other sites More sharing options...
Will Arnold Posted May 7, 2006 Report Share Posted May 7, 2006 Whats the width on it as I need room to fit the cnc pads in as well , some more comments would be lovely people u can run any width!!! your koxx rim is 47mm, so use whatever rim as you like m8 width is not a problem Quote Link to comment Share on other sites More sharing options...
Alun Goch Posted May 7, 2006 Report Share Posted May 7, 2006 Two and they werent that harsh either.Wow, you must have fingers the size of my thighs to have done that then!Is that the only dent? if so, you dont need a new rim, may as well use it till the bitter end cheers andyYou might be able to fix it? If you can get hold of an aluminium welder, just bend out that part, cut a piece of aluminium to fit behind it, and try that?? Should save you some dosh if it worksAlun Quote Link to comment Share on other sites More sharing options...
CBProductions Posted May 7, 2006 Author Report Share Posted May 7, 2006 (edited) I have no welder , I have no access to one and I also think that a new one will be more efficent.Oh and Will I thought you had trouble running your new echo one ? Edited May 7, 2006 by CBProductions Quote Link to comment Share on other sites More sharing options...
Will Arnold Posted May 7, 2006 Report Share Posted May 7, 2006 I have no welder , I have no access to one and I also think that a new one will be more efficent.Oh and Will I thought you had trouble running your new echo one ?if you get an echo one, it should be the same width as the koxx one???!?!i had a different model frame remember, so maybe thats why? Quote Link to comment Share on other sites More sharing options...
CBProductions Posted May 7, 2006 Author Report Share Posted May 7, 2006 ok ace echo it is then , Cheers everyone for their help Quote Link to comment Share on other sites More sharing options...
Damon W Posted May 8, 2006 Report Share Posted May 8, 2006 echo cnc lil small but better tyre bounce then boing boing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.