LukeDraisey! :) Posted April 2, 2006 Report Share Posted April 2, 2006 i was gonna get a deng shin, but i though i would consult the almighty forum first to see if there is a cheaper/better one.Does anyone know one with a realy thick sidewall? Quote Link to comment Share on other sites More sharing options...
Balman Posted April 2, 2006 Report Share Posted April 2, 2006 Well to be honest I just run any inner tube in mine it doesn't tend to make a difference but if you are having prolems with punchers you can get like slim rim tape to put on the inside of your tyer and I fix's it's self but will only take so many punchersI hope I have helped!!!jack. Quote Link to comment Share on other sites More sharing options...
Ash-Kennard Posted April 2, 2006 Report Share Posted April 2, 2006 I got mine for £1 at tesco, I bought about 10 Quote Link to comment Share on other sites More sharing options...
Balman Posted April 2, 2006 Report Share Posted April 2, 2006 yer see it doesn't matter as long as its the right sizejack. Quote Link to comment Share on other sites More sharing options...
Simpson Posted April 2, 2006 Report Share Posted April 2, 2006 in my stock run like a 3 inch tube becuase it stops pinches and i like them when there wider Quote Link to comment Share on other sites More sharing options...
Balman Posted April 2, 2006 Report Share Posted April 2, 2006 yer it don't make much difference thoughjack.p.s hi simpson its jack t-pro used to be on a poo db Quote Link to comment Share on other sites More sharing options...
sembo_trials Posted April 2, 2006 Report Share Posted April 2, 2006 i was gonna get a deng shin, but i though i would consult the almighty forum first to see if there is a cheaper/better one.Does anyone know one with a realy thick sidewall?look mate put is this way, i have a continental innertube which is snakbite proof, and i proved its snake bte proof myself. i cant remebr which continetal it was but go on there site and have a look, they are amzing Quote Link to comment Share on other sites More sharing options...
Lee Cable Posted April 2, 2006 Report Share Posted April 2, 2006 I just ride with rubbish ones, When you get validated, speak to pauloliver. Thats where i get my tubes from!Aslong as you dont have to much pressure in there you shouldnt pinchflat anyays From Lee Quote Link to comment Share on other sites More sharing options...
Clawz114 Posted April 2, 2006 Report Share Posted April 2, 2006 get maxxis downhill innertubes http://www.chainreactioncycles.com/Models.aspx?ModelID=5418 they are expensive but they are uber thick to stop pinch flats Clawz Quote Link to comment Share on other sites More sharing options...
Lee Cable Posted April 2, 2006 Report Share Posted April 2, 2006 get maxxis downhill innertubes http://www.chainreactioncycles.com/Models.aspx?ModelID=5418 they are expensive but they are uber thick to stop pinch flats ClawzThey dont work, I used to pinch flat them more, than i do my cheap ones! From Lee Quote Link to comment Share on other sites More sharing options...
the judge Posted April 2, 2006 Report Share Posted April 2, 2006 I pinchflatted one of those maxxis tubes but that might have just been due to my crappy rear tyre. I'd say just buy a cheapo one and just replace it when it goes. He rides mod btw people. Quote Link to comment Share on other sites More sharing options...
joe_eyre Posted April 3, 2006 Report Share Posted April 3, 2006 Hi thereI think you tend to get the little pinch flattys with the cheaper innertubs more often. A good innertube i think is the kenda ones. they last a fer while longer if you ask me, thats what i habe run for around 5 months now.Cheers joe Quote Link to comment Share on other sites More sharing options...
CurtisRider Posted April 3, 2006 Report Share Posted April 3, 2006 ive been using bog standard tubes for frickin ages now, and never had a puncture on my trials bike(stock o mod) in the year and a half+ that ive been using them, i run between 15, and 25 psi, depending on the weather and what im ridingdont forget to run some talc/chalk dust on your tubes before installation, this helps allow the tube to move when the tyre flexes, and helps reduce the chance of a pinch Quote Link to comment Share on other sites More sharing options...
mat hudson Posted April 3, 2006 Report Share Posted April 3, 2006 i run 15-25 psi with my minion sometimes i'm pretty harsh and i just run a shitty 2quid innertube. it works fine, not had a pinch yet (touches wood). Quote Link to comment Share on other sites More sharing options...
mr ailsbury Posted April 3, 2006 Report Share Posted April 3, 2006 (edited) what ever you do DON'T get a kenda tube! they are absolutly terrible!!! I bought a few and on all of them the valve split and one of them the valve just came completly off and flew away somewhere lol they cost me like £4/£5 each aswell lol... i just use standard cheap ass raleigh ones and i've only pinched about twice... Edited April 3, 2006 by mr ailsbury Quote Link to comment Share on other sites More sharing options...
Davetrials Posted April 3, 2006 Report Share Posted April 3, 2006 raligh make an extra thick one luke, but ur gonna have a 2.5 tyre on ur new monty so u lose a great risk of gettin pinches. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.