_skj0lsvik_ Posted March 31, 2006 Report Share Posted March 31, 2006 Hi, I'm going to buy me a new set of cranks (BT crankset) and I wondered which cog I should put on ...Please help me, do this one fit: SurlyIf not, please reccomend me one on this site, cyclecomponents.Thanks, Sondre Quote Link to comment Share on other sites More sharing options...
grantham Posted March 31, 2006 Report Share Posted March 31, 2006 that surley cog should fit, the bashguard fo r bt is to be used with an 18 tooth cog or smaller Quote Link to comment Share on other sites More sharing options...
Shaun H Posted April 1, 2006 Report Share Posted April 1, 2006 that surley cog should fit, the bashguard fo r bt is to be used with an 18 tooth cog or smaller Pretty sure that cog's for rear hubs? Might be wrong though, just make sure you check for certain before buying... Quote Link to comment Share on other sites More sharing options...
Onza Kieron Posted April 1, 2006 Report Share Posted April 1, 2006 (edited) That's the whole idea, a rear cog is also a front cog with this generation of cranks, gawd, where have you been for all these years I can't find one on that site because I can't understand it, i tried loads of random pages with no luck. Edited April 1, 2006 by onza kieron Quote Link to comment Share on other sites More sharing options...
Shaun H Posted April 1, 2006 Report Share Posted April 1, 2006 That's the whole idea, a rear cog is also a front cog with this generation of cranks, gawd, where have you been for all these years I can't find one on that site because I can't understand it, i tried loads of random pages with no luck.Yeah I know but I was thinking if it goes as low as 13tooth then the thread has to be the smaller size which is on mod rear hubs.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.