Wright Pads Posted March 29, 2006 Author Report Share Posted March 29, 2006 (edited) Woodhatch, Reditch, Surry, it's over tut road From Canon Uk HQRim is now okay, i did it all early this morning, got it near as damit and only up and down left, can feel a bend in tut rim. So i rode the bike and i think it's eased off now, will check when i return home tomrrow and ride some moreI blame Deng as i had problems time and time again with his gear Edited March 29, 2006 by Wright Pads Quote Link to comment Share on other sites More sharing options...
Will Arnold Posted March 29, 2006 Report Share Posted March 29, 2006 Woodhatch, Reditch, Surry, it's over tut road From Canon Uk HQRim is now okay, i did it all early this morning, got it near as damit and only up and down left, can feel a bend in tut rim. So i rode the bike and i think it's eased off now, will check when i return home tomrrow and ride some moreI blame Deng as i had problems time and time again with his gearonly his stuff? Quote Link to comment Share on other sites More sharing options...
Wright Pads Posted March 31, 2006 Author Report Share Posted March 31, 2006 It's under his name/ownership persay so best be correct on that matter eh?Maguras i have issues but i can fix them, rim when egged or bent or other you can't Quote Link to comment Share on other sites More sharing options...
joe_eyre Posted April 1, 2006 Report Share Posted April 1, 2006 Just send it back to Tarty or wherever you bought it and I'm sure they'll replace it, so long as it doesnt show signs of use. Hi thereYes i would do just that. Send it back and ask them to re-build it or somethink on the same lines as that.Cheers joe Quote Link to comment Share on other sites More sharing options...
Wright Pads Posted April 1, 2006 Author Report Share Posted April 1, 2006 I sorted it, got all the side to side out then found the egg, marked it on the inside rim then a little hop on the back with no tyre on got it sorted and then truned it up all nice and tigtht and working fine now has a fresh grind. Just the task of beeding my pads back in...draggin session ahahahahah Quote Link to comment Share on other sites More sharing options...
N.Wood Posted April 1, 2006 Report Share Posted April 1, 2006 I sorted it, got all the side to side out then found the egg, marked it on the inside rim then a little hop on the back with no tyre on got it sorted Hahaha, thats funny shit. Quote Link to comment Share on other sites More sharing options...
Wright Pads Posted April 1, 2006 Author Report Share Posted April 1, 2006 Well thats a lie, it was more ''you will f**king be round'' thus said and the kinda hoping to kill a rim which in turn got ride of the egg. She's now spot on. Did a nice 12ft drop on her today no movement so i'm happy and now with fresh grind happyer.More drops tomrorw on the Plymotuh ride i thinks Quote Link to comment Share on other sites More sharing options...
James_R Posted April 1, 2006 Report Share Posted April 1, 2006 If Echo made 36h rims, the 06 Echo rims wouldn't be so weak in the first place. More holes i.e. 36h instead of 32h = smaller drills = thinner rim width = fatter sidewalls. Quote Link to comment Share on other sites More sharing options...
Wright Pads Posted April 1, 2006 Author Report Share Posted April 1, 2006 No.......The more the weakerThe less the stornger Thus in the manner of how much material is hereBuild wise a 36 is stronger by a mear minumal but 32 is practical and better and more cost effective for all for many reasons mateAny way wheel is fine and this topic is now dead bar reams of bitch fitting on it's way i guess. Cheers ta lovely good night Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.