C_T_C monty Posted March 24, 2006 Report Share Posted March 24, 2006 Hello to all,I have heard that if you bleed your Maguras with water it is suppose to make them work better.I know how to bleed my brakes but I ran into a spot of bother.i bleed my front brake first and everything was fine, then i started to bleed my rear brake and it just stopped working :$ .So i swap the levers to see if the rear lever was broken but the lever was fine and the front lever (that was on the rear set-up) didn't work. I thought it might be the Cylinders on the so i swap them round and theirs was nothing wrong with the cylinders.So i think it might be the tubing because the cylinders and the levers work on the front hose which is shorter than the rear one. Any help is widely Appreciated.Thanks, Charlie Quote Link to comment Share on other sites More sharing options...
Ash-Kennard Posted March 24, 2006 Report Share Posted March 24, 2006 it might just be that there isn't enough water in you hose, just fill it up as much as you can. Quote Link to comment Share on other sites More sharing options...
C_T_C monty Posted March 24, 2006 Author Report Share Posted March 24, 2006 it might just be that there isn't enough water in you hose, just fill it up as much as you can.Thanks alot , I thought i got as much water in the hose as i could, but i could get more in. Thanks again brakes work better than ever. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.