jak-89 Posted March 18, 2006 Report Share Posted March 18, 2006 Hi ... Iv just bought some echo cnc's in black and iv put my eno freewheel on and there is a space were it looks like a bashring should go if you get what i mean What shall i do , do i need a bash ring or will i be able to ride without one ?? Cheers Jack Quote Link to comment Share on other sites More sharing options...
Dr Greenthumb Posted March 18, 2006 Report Share Posted March 18, 2006 As far as i know yes, I think that is alright.Listen to what other people say before you take my word for it though.Dan Quote Link to comment Share on other sites More sharing options...
jak-89 Posted March 18, 2006 Author Report Share Posted March 18, 2006 Ok thanks Quote Link to comment Share on other sites More sharing options...
Mat Smith! Posted March 18, 2006 Report Share Posted March 18, 2006 There is space there, so that you can run a bash ring, if you want/need to.Maybe put some spacers on? but it shouldn't really matter that much.Mat Quote Link to comment Share on other sites More sharing options...
rickyb Posted March 18, 2006 Report Share Posted March 18, 2006 Is there still some threads in the gap if thereis then it will just need titening more just ride with it on and put a lot of weight on the cranks so it will spin untill it will not spin anymore and then it will be tite, but if there is no threds then you will be fine it will be ment to be like that but i dont think many people have had the same problem ( i haven't heard of any) but just try what i'v said above and you should be fine Hope i'v helped mate, rickyb Quote Link to comment Share on other sites More sharing options...
jak-89 Posted March 18, 2006 Author Report Share Posted March 18, 2006 ok thanks and no there is no threads left just a clean space about 4 mm Cheers Jack Quote Link to comment Share on other sites More sharing options...
king_kennythe1st Posted March 18, 2006 Report Share Posted March 18, 2006 you might just have to run a spacer there, not 100% sure though. ring the place where you bought em from and ask them they will let you know Quote Link to comment Share on other sites More sharing options...
Callum Trialsin Posted March 18, 2006 Report Share Posted March 18, 2006 What do you need to run a front freewheel, like do some cranks not allow you to run one.Any help would be much appreciated.p.s sorry if you think i should have started a new topic but i didnt see the piont in making anohter "HELP" topic as this one was already about front freewheels :$ .Callum Quote Link to comment Share on other sites More sharing options...
Modified Posted March 18, 2006 Report Share Posted March 18, 2006 I think most trials cranks will let you run a freewheel, just some of them need extra clearence on the BB, for bash rings etc.Correct me if I'm wrong.Modified Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.