M3LLON_t-mag Posted March 11, 2006 Report Share Posted March 11, 2006 (edited) after buying a t-mag about 3 months ago i knew that parts were going 2 start braking, my BB went about 2-3 weeks ago so i upgraded from the standard setup i had (onza BB/ onza crank and ACS freewheel) to a more reliable setup (try-all crank BB and the ENO freewheel) just one problem though the bolts on the BB are sticking out slightly i have tried to tighten them further but it isn't working and they still stick out about 2-3mm i was wandering if anyone has come across this problem themselves and how did you solve it???would appreciate any responsethanks,mellon Edited March 11, 2006 by M3LLON_t-mag Quote Link to comment Share on other sites More sharing options...
mini Posted March 11, 2006 Report Share Posted March 11, 2006 Hi.The bolt is tight it just sticks out a bit. If what you say is true you can't tighten it no more. There is nothing wrong with it mate don't worry.Thanks and i hope i've answered your question correctly.From Stuart. Quote Link to comment Share on other sites More sharing options...
ramps Posted March 11, 2006 Report Share Posted March 11, 2006 My tensile cranks are like that, i just went out and rode and nothing has happened to them. If it is tight it is ok. Quote Link to comment Share on other sites More sharing options...
basher Posted March 11, 2006 Report Share Posted March 11, 2006 if the cranks dont move then they are all right as the bolt has tightened up against the cranks and theres no need to worry. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.