PaRtZ Posted February 23, 2006 Report Share Posted February 23, 2006 please answer, with feedback if posscheers Quote Link to comment Share on other sites More sharing options...
Tom Booth Posted February 23, 2006 Report Share Posted February 23, 2006 11,000 seems to be the favoured speed, And the speed at which most grinders come prefixxed at now. So im guessing 11.00 is the one? Quote Link to comment Share on other sites More sharing options...
011001000110010101110010 Posted February 23, 2006 Report Share Posted February 23, 2006 (edited) Which ever on the cheapy halfords one is set to? I think it might be 12... Ill go check.It doesnt tell me so it truly is rubbish. Edited February 23, 2006 by derf Quote Link to comment Share on other sites More sharing options...
mat hudson Posted February 23, 2006 Report Share Posted February 23, 2006 who cares mat just move it down the rim quicker if its spinning faster. Quote Link to comment Share on other sites More sharing options...
Jaffacakes Posted February 23, 2006 Report Share Posted February 23, 2006 Mine says lots of things 600w, 230v , 11000 min-1. So my guess is 11000. Quote Link to comment Share on other sites More sharing options...
anzo Posted February 23, 2006 Report Share Posted February 23, 2006 My DeWalt goes 11,000, not that I let it anywhere near my rims Quote Link to comment Share on other sites More sharing options...
Simpson Posted February 23, 2006 Report Share Posted February 23, 2006 A faster spinning speed better grinds?never actually occoured to be but now i feel curious hmmmm Quote Link to comment Share on other sites More sharing options...
Urpedigreechumdog Posted February 23, 2006 Report Share Posted February 23, 2006 Who gives a shit? Not having a dig but, wtf? Grinder speeds, go and have a wank or something. When you're talking about this jazz you know you're getting close to some sort of trials geek Quote Link to comment Share on other sites More sharing options...
Endohopper Posted February 23, 2006 Report Share Posted February 23, 2006 I'm not sure what speed mine's set to , but I expect angle and keeping it consistant are more important . As long as the depth is equal all the way around , or else the rim will have "grabby" spots . Quote Link to comment Share on other sites More sharing options...
oakley Posted February 24, 2006 Report Share Posted February 24, 2006 A faster spinning speed better grinds?never actually occoured to be but now i feel curious hmmmmwrong!!!!!!!slower the better guys. get as slower one as possible!!honeslty, my dad uses a air compressed grinder and does it so the disc id spinning dead slow and it gives thee best grinds.zippy! Quote Link to comment Share on other sites More sharing options...
Clarky Posted February 24, 2006 Report Share Posted February 24, 2006 Geez i dont see the point in the grinding speeds what does it matter if it aint as harsh as you want aply some more pressure and ime sure that u will gte the grind wanted. Quote Link to comment Share on other sites More sharing options...
Walleee Posted February 24, 2006 Report Share Posted February 24, 2006 Geez i dont see the point in the grinding speeds what does it matter if it aint as harsh as you want aply some more pressure and ime sure that u will gte the grind wanted. A slower speed will in theory give a deeper, more harsh grind. but yes, if you have a high speed grinder, you'll need to apply more pressure to compensate for that, but you run the risk of removing too much material from the rim sidewall...... Quote Link to comment Share on other sites More sharing options...
Simpson Posted February 24, 2006 Report Share Posted February 24, 2006 A slower speed will in theory give a deeper, more harsh grind. but yes, if you have a high speed grinder, you'll need to apply more pressure to compensate for that, but you run the risk of removing too much material from the rim sidewall......And slipping and cutting off your leg Quote Link to comment Share on other sites More sharing options...
PaRtZ Posted February 25, 2006 Author Report Share Posted February 25, 2006 When you're talking about this jazz you know you're getting close to some sort of trials geek what? reading a figure from a grinder makes you a trials geek? Im asking because my grinds dont seem to work at all and I was wondering if it was my grinder that was wrong or my technique Quote Link to comment Share on other sites More sharing options...
CBProductions Posted February 25, 2006 Report Share Posted February 25, 2006 what? reading a figure from a grinder makes you a trials geek? Im asking because my grinds dont seem to work at all and I was wondering if it was my grinder that was wrong or my technique Just went out two days ago and bought a grinder from argos with no adjustable speed and a metal cutting disc , and ground my rim and it is immense its got to be your techniqe, ill have to show you how one day dude Quote Link to comment Share on other sites More sharing options...
robonatomz Posted February 25, 2006 Report Share Posted February 25, 2006 just a cheap shitty grinder seems to be best, i bought a realy powerfull one thinking it would be better bot its either too smooth or it tries to cut my rim in half dont know what the rpm is but is 1200 w or sumat. actually you know what . this is a realy sad topic. we all must be teribly bored! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.