Joe_Elding Posted January 29, 2006 Report Share Posted January 29, 2006 I'm trying to get my 18t cog and bash off becuase i'm getting new cranks but how the hell do I do it?Theres nowhere to put a tool and on TB.co.uk it says thwere too tight to use a chainwhip on?I would prefere to keep the cog so I don't want to gring it square or anything but is that the only way? cheers Quote Link to comment Share on other sites More sharing options...
James_Porter Posted January 29, 2006 Report Share Posted January 29, 2006 i used a chain whip a vice and my muscles. came off allright... bout the only way you can do it Quote Link to comment Share on other sites More sharing options...
Tom Booth Posted January 29, 2006 Report Share Posted January 29, 2006 (edited) Chuck he cog and crank arm in a wooden edged vice...Reaaaaaly tight....Get a decent length extension bar...and twist..anti clockwise Think its anti clockwise anyway..preeety sureTom Edited January 29, 2006 by Tom Booth Quote Link to comment Share on other sites More sharing options...
Joe_Elding Posted January 29, 2006 Author Report Share Posted January 29, 2006 Chuck he cog and crank arm in a wooden edged vice...Reaaaaaly tight....Get a decent length extension bar...and twist..anti clockwise Think its anti clockwise anyway..preeety sureTomwhat so i put the bar over the cranks?Would it work if i just put two bits of wood on the inside of a normal vice? Quote Link to comment Share on other sites More sharing options...
thefletch Posted January 29, 2006 Report Share Posted January 29, 2006 use a metal vice because the wooden ones often get chewed up up. put a chain around the cog and then put it in the vice, this way u wont f**k the cog and u get a flat edge so it wont twist in the vice, then get an extension bar of some sort, hammers dont work very well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.