Will Arnold Posted January 27, 2006 Report Share Posted January 27, 2006 is it advisable to take it apart and take the grease out and replace it with light oil, much like all hubs out there...?as far as im aware, the more grease = the more skippage because it doesent let the pawls sit into the ratchet fully.taWill Quote Link to comment Share on other sites More sharing options...
Mark W Posted January 27, 2006 Report Share Posted January 27, 2006 Pretty much, yeah.Stripping them down, then using some lightweight oil on the inside of the pawl carriers sounds like the best plan. Stripping them's a piece of piss, so go for it Quote Link to comment Share on other sites More sharing options...
deanie-b Posted January 27, 2006 Report Share Posted January 27, 2006 I would, When i had my Eno (second hand) It was skipping all the time, Even when the freewheel was under no pressure, and it even made a shitty noise I whipped it apart, cleaned everything, Bearings, EtcMade a lovely deep click, And engaged 24\7You can't go wrong Ps: Just make sure you have a tray or something to catch the 'inners'. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.