Shadowfax Posted January 14, 2006 Report Share Posted January 14, 2006 does anyone have blueprints for magura booster, i want to made one so I need themthank you Quote Link to comment Share on other sites More sharing options...
watto Posted January 14, 2006 Report Share Posted January 14, 2006 can't you design your own ? make it unique for your bike Quote Link to comment Share on other sites More sharing options...
Jsy Ben Posted January 14, 2006 Report Share Posted January 14, 2006 ye, be creative what about gathering/taking designs from several companys e.g Echo, Onza, Magura... and taking individual bits from each booster ...that you think will make a more effective booster ... or a cooler looking booster but still with structual soundness and of course show us the final result Quote Link to comment Share on other sites More sharing options...
Simpson Posted January 14, 2006 Report Share Posted January 14, 2006 you could take off your booster and just draw round it of course!!! lol Quote Link to comment Share on other sites More sharing options...
watto Posted January 14, 2006 Report Share Posted January 14, 2006 What bike do you have ? and is it fourbolt mount ? Quote Link to comment Share on other sites More sharing options...
Mark W Posted January 14, 2006 Report Share Posted January 14, 2006 If you go to Heatsink's site and check their booster out, you can see that it's more than just a case of drawing a pretty shape though... Quote Link to comment Share on other sites More sharing options...
1-modd-1 Posted January 15, 2006 Report Share Posted January 15, 2006 you could take off your booster and just draw round it of course!!! lollol simpson if he wants to make a boster i would assume he doesn't already have one and by the way hows your echo Quote Link to comment Share on other sites More sharing options...
Shadowfax Posted January 15, 2006 Author Report Share Posted January 15, 2006 If you go to Heatsink's site and check their booster out, you can see that it's more than just a case of drawing a pretty shape though...thats correct, maybe i could design my own but i still ned some basic info, or i will just have to measure everything... Quote Link to comment Share on other sites More sharing options...
watto Posted January 15, 2006 Report Share Posted January 15, 2006 (edited) you will need to measure the distance between the bolts and the distance from a bolt on one side to the one on the other for both top and bottom Edited January 15, 2006 by watto Quote Link to comment Share on other sites More sharing options...
fredrico Posted January 15, 2006 Report Share Posted January 15, 2006 (edited) Hi when i was waiting for my booster to arrive i decided to make my own tempory one. What i did was measure the mounting distance then fold a piece of paper in half then draw half of that distance and and then draw the half of the inside and outside curve etc. Then cut out the paper and you should have an equally drawn booster. I made mine quickly in a tech lesson at school using acrylic which wasnt amazing but it did the job, however i rushed the cutting out so its not neat or tidy at all. But basically i kept to the original booster layout but bigger. hope you understood what i tried saying and good luck. EDIT: this was for a 2 bolt magura mount. Edited January 15, 2006 by fredrico Quote Link to comment Share on other sites More sharing options...
T_PRO Posted January 15, 2006 Report Share Posted January 15, 2006 Just make your own custom desgin, thats what i would do Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.