Matt_Tupman Posted January 11, 2006 Report Share Posted January 11, 2006 (edited) Hello again boys and girlsI need some more help My 05 Magura lever is leaking from the plastic piston, can i pull it out? How? can i put an 04 piston in an 05 lever? do i need to do anything to the body or piston before i put it back in?Any help would be much appreciated Edited January 11, 2006 by Matt_Tupman Quote Link to comment Share on other sites More sharing options...
Urpedigreechumdog Posted January 11, 2006 Report Share Posted January 11, 2006 You can use an 04 in an 05 lever I find the best way to get it out is to push a small allen key through either the bleed bolt hole or the hose hole, pushing agains the piston until it pops out (obviously with the lever blade not in place. Failing that, connect a bleed kit up to it and do all the bolts up, push the syringe as hard as you can till it pops out. And when putting the piston back in, some sort of lube usually helps to keep it ticking over smoothly Quote Link to comment Share on other sites More sharing options...
Matt_Tupman Posted January 11, 2006 Author Report Share Posted January 11, 2006 You can use an 04 in an 05 lever I find the best way to get it out is to push a small allen key through either the bleed bolt hole or the hose hole, pushing agains the piston until it pops out (obviously with the lever blade not in place. Failing that, connect a bleed kit up to it and do all the bolts up, push the syringe as hard as you can till it pops out. And when putting the piston back in, some sort of lube usually helps to keep it ticking over smoothly you beast followed that and it worked a treat cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.