Josephine Posted December 25, 2005 Report Share Posted December 25, 2005 Right, just wanna make sure 68x127.5mm UN53 BB + ACS Claw + Echo 2005 cranks + Echo bashring = rubbing on t' BB or not? I just wanna check 'cos I've officially fudged all hopes of ever running a bashplate again and I want to make sure this'll fit. I'll probably take a file to the tabs on the Claw anyway (though not much), though hopefully this isn't 100% necessary... Joe Quote Link to comment Share on other sites More sharing options...
Caleb Posted December 25, 2005 Report Share Posted December 25, 2005 pretty damned sure it will yeah my bros monty x lite cranks, with echo bash, acs/dicta/eno in that order with a 127mm un52 fit easy so should be fine Quote Link to comment Share on other sites More sharing options...
TheMunn Posted December 26, 2005 Report Share Posted December 26, 2005 Should fit no problem but you might have to gind the tabs on your freewheel a bit. Quote Link to comment Share on other sites More sharing options...
nafan Posted December 26, 2005 Report Share Posted December 26, 2005 Yeah I agree with "TheMunn", before I had an old XT BB which was only 110 and my echo ring rubbed on my frame, I bought a 127.5 neco bb from selectbikes and it is fine If it doesn't fit you can grind the tabs on your freewheel Quote Link to comment Share on other sites More sharing options...
Mark W Posted December 27, 2005 Report Share Posted December 27, 2005 If they're square taper, watch out. If you over-tighten them, it splays the tapers meaning it's gotta go on a bit further to stop it being slack. With my Musclemen back in the day, I could only fit a Dicta on (slimmest freewheel available) and even that almost rubbed, simply 'cos I'm f**king heman and over-tightened my cranks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.