bhups Posted December 22, 2005 Report Share Posted December 22, 2005 Hello,I needed to know if there's any way to remove a pre-ground acs claw front freewheel without destroying it ?Bhups. Quote Link to comment Share on other sites More sharing options...
Mark W Posted December 22, 2005 Report Share Posted December 22, 2005 Undo the lockring.Take off the driveshell and bearings.Remove the pawls and springs from their housings.Clamp the flats from by where the pawls and springs were in a vice.Turn the crank off the freewheel.Sorted Quote Link to comment Share on other sites More sharing options...
downhill_rob2@hotmail.com Posted December 22, 2005 Report Share Posted December 22, 2005 It hink he means its been welded shut and ground down so that the tabs are ground off?Ifso, no, there isnt any way of getting it off without ruinin it Quote Link to comment Share on other sites More sharing options...
tipsy Jock Posted December 22, 2005 Report Share Posted December 22, 2005 If its welded shut, cut through both sides of the driveshell so you can get to the inner bits Quote Link to comment Share on other sites More sharing options...
deanie-b Posted December 22, 2005 Report Share Posted December 22, 2005 If it's welded and has no tabs, The best way to get it off is with My best friend.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.