Alan Posted December 8, 2005 Report Share Posted December 8, 2005 whats the best bodge you have ever done on a bike?? i know someone that used a cut up disk brake as a brake booser and he rounded of the thread in his forks so he used a quick release to hold on his magura! Quote Link to comment Share on other sites More sharing options...
Mat Smith! Posted December 8, 2005 Report Share Posted December 8, 2005 It has been posted before and I'm sure it was in NMC, use the search.. Mat Quote Link to comment Share on other sites More sharing options...
Danny Swindlehurst Posted December 8, 2005 Report Share Posted December 8, 2005 ma bro lost his bar end on his monty and he has bar rap and we bodged a FRUIT SHOOT bottle top on Quote Link to comment Share on other sites More sharing options...
N.Wood Posted December 8, 2005 Report Share Posted December 8, 2005 I'm no good at macgyvering. I put a bit of bolt in my Magura to make it bite earlier in it's travel? Quote Link to comment Share on other sites More sharing options...
Alan Posted December 8, 2005 Author Report Share Posted December 8, 2005 macgyvering??? Quote Link to comment Share on other sites More sharing options...
downhill_rob2@hotmail.com Posted December 8, 2005 Report Share Posted December 8, 2005 I put a bit of bolt in my Magura to make it bite earlier in it's travel? lol Iv glued in my BB cause i strippe dthe BB shell I jubilee clipped my maggy on and rode with it for about 6 months iv done loads of bodges Quote Link to comment Share on other sites More sharing options...
B.E.A.U Posted December 8, 2005 Report Share Posted December 8, 2005 My whole bike is a bodge lol. Well i zip tied my mech to my frame with a brake pad underneath so my chain didnt rub. i got told by halfords water bleading my brake was the biggest bodge they have ever seen lol Quote Link to comment Share on other sites More sharing options...
N.Wood Posted December 8, 2005 Report Share Posted December 8, 2005 macgyvering??? Means 'bodge', for the uncool lol Iv glued in my BB cause i strippe dthe BB shell I jubilee clipped my maggy on and rode with it for about 6 months iv done loads of bodges And yes... It's just like the ball bearing you get in RB levels, but i couldn't find a ball bearing so i used a cut-down bolt. Quote Link to comment Share on other sites More sharing options...
Alan Posted December 8, 2005 Author Report Share Posted December 8, 2005 (edited) I USED TWO OF THESE AND TWO WASHERS TO MAKE CHAIN TENSIONERS FOR MY BMX,WORKS A CHARM! Edited December 8, 2005 by T-MAGura Quote Link to comment Share on other sites More sharing options...
ramps Posted December 9, 2005 Report Share Posted December 9, 2005 my mate made sum grips out of pipe insulation and insulation tape as an emergancy bodge! I dont do bodging on my bike if i can help it, i am a bit of a ponse about that realy. Quote Link to comment Share on other sites More sharing options...
poopipe Posted December 9, 2005 Report Share Posted December 9, 2005 Means 'bodge', for the uncool means bodge for those old enough to remember the tv series- he plays jack o'neill in stargate now...- my favourite is the 2 foot of scaffolding pole to straighten 1pc cranks bodge. would recommend it on 3pc ones though Quote Link to comment Share on other sites More sharing options...
smurftrial Posted December 9, 2005 Report Share Posted December 9, 2005 ive only done one and that was a crap one were i used a bolt to keep my brake on as the threads had just worn off Quote Link to comment Share on other sites More sharing options...
t-mag_rider Posted December 9, 2005 Report Share Posted December 9, 2005 It has been posted before and I'm sure it was in NMC, use the search.. MatIt has, it was me who did it, and it was in NMC. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.