Matthews Posted November 23, 2005 Report Share Posted November 23, 2005 Evenin I'v just put my wheel back on today after a while not bothering and set everything up nice 'n' fine but when I went to ride it the cranks , chain and cassette would spin whenever I started to pedal around. Im totally confussed about this, the last time i used my bike it was fine. I havn't got a clue what it could be (Y) HELP NEEDED! cheerz Quote Link to comment Share on other sites More sharing options...
CurtisRider Posted November 24, 2005 Report Share Posted November 24, 2005 are you running the hub dry inside? just pull the hub open and check it all, sounds like your pawls have seized somehow? Quote Link to comment Share on other sites More sharing options...
Siders77 Posted November 24, 2005 Report Share Posted November 24, 2005 The threads have stripped inside it. :P Quote Link to comment Share on other sites More sharing options...
Burton Posted November 24, 2005 Report Share Posted November 24, 2005 What threads are their to strip? :P Mine did it for a bit, just one of the bearings on the axle is a little dodgy. So i think if it is really bad, then replace the bearing. Quote Link to comment Share on other sites More sharing options...
Siders77 Posted November 24, 2005 Report Share Posted November 24, 2005 I'm not sure what threads he stripped but I know that there are threads in there because Nozmiester stripped his too. Quote Link to comment Share on other sites More sharing options...
Tom Booth Posted November 24, 2005 Report Share Posted November 24, 2005 the ratchet ring threads. Im sure will arnold did it aswell? Quote Link to comment Share on other sites More sharing options...
SQuiT-man Posted November 24, 2005 Report Share Posted November 24, 2005 Check the pawls didnt all drop out when the wheel was out :P. Sounds obvious, but it can happen easily, my profile seems to almost do it automatically when you take the wheel off. Quote Link to comment Share on other sites More sharing options...
Will Arnold Posted November 24, 2005 Report Share Posted November 24, 2005 yer, mine did this exact same thing :P profile should be able to fix it at dirt cheap prices like they did for me :) u will need a hub body and ratchet ring, but i got a complete hub basically because everything was soo fecked :) Quote Link to comment Share on other sites More sharing options...
Siders77 Posted November 25, 2005 Report Share Posted November 25, 2005 The threads have stripped inside it. :) Check the pawls didnt all drop out when the wheel was out :) . Sounds obvious, but it can happen easily, my profile seems to almost do it automatically when you take the wheel off. :P Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.