PaRtZ Posted October 31, 2005 Report Share Posted October 31, 2005 After finding a mysterious flat on my back tyre (actually caused by my shite rim tape allowing the tube to be cut on one of the holes in my try-all rim) I took my wheel off to change the tube. I thought "ah well, the wheel's off so ill clean the driver" To my dismay I had to really yank the driver out instead of a gentle but sharp pull. I then had a closer look and only found 2/3 of my bearings had gone from the inside of the driver bit. Don't know how it had happened but dont care to be honest (Y) Does anyone know where I can get replacement ones from? Custom Riders Seem to do something of the description but I think its the otside of the driver bit Thanks. If Anyone doesn't know which bit I mean ill try a diagram later Quote Link to comment Share on other sites More sharing options...
Heatsink Posted October 31, 2005 Report Share Posted October 31, 2005 These sound like the same bearings Olly C was replacing - Info: FAQ: SMB bearings.com Here's the product page: http://www.smbbearings.com/Framesets/Thin_Section_Frame.htm Apparently you want: 6802-2RS (Look for 15mm as the bore on the left hand side of the table) All the info on the types of seals (ZZ / 2RS / 2RU types) with simple diagramshttp://www.smbbearings.com/SMBtechdata.htm Steve Quote Link to comment Share on other sites More sharing options...
Ducko Posted November 2, 2005 Report Share Posted November 2, 2005 trhese is a guy in llandudno junction that sells them mate they are expensive about £20 i think but they are super good and really strong, i could break the fattys anyways :P Quote Link to comment Share on other sites More sharing options...
Heatsink Posted November 2, 2005 Report Share Posted November 2, 2005 Only £1 each - Info in FAQ Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.