Jeza Posted October 22, 2005 Report Share Posted October 22, 2005 Hi all, I had a quick search through tf on the keyword of "eno", but couldnt find any topics on it (ran my eyes down the list) so therefore i admit to not searching through every post as i wanna ride! (Y) , So rather than just posting..."use search" Please would you advise me on why my eno freewheel may be ocassionaly skipping because i would rather it not skip on a drop as it hasnt yet, also ideas and methods of fixing it. Thanks Jeza Quote Link to comment Share on other sites More sharing options...
Siders77 Posted October 22, 2005 Report Share Posted October 22, 2005 Take the lock ring off and clean all of the thick shit out of it. I ran mine with a shit load of WD40 before. (Y) Quote Link to comment Share on other sites More sharing options...
minitrialer Posted October 22, 2005 Report Share Posted October 22, 2005 take it apart, clean it, sometimes it has too much grease which can cause it too post, also search for white industries Quote Link to comment Share on other sites More sharing options...
mat hudson Posted October 22, 2005 Report Share Posted October 22, 2005 unscrew lock ring, take apart. scrape out/flush out greese with rag and gt85/wd40 put it back together. Quote Link to comment Share on other sites More sharing options...
BASETA26ER Posted October 22, 2005 Report Share Posted October 22, 2005 take it apart and try cleaning as much as the grease out as you can then spry with wd40.. put back together and there you have it!! Quote Link to comment Share on other sites More sharing options...
Jeza Posted October 23, 2005 Author Report Share Posted October 23, 2005 ok thanks lads most appreicated Quote Link to comment Share on other sites More sharing options...
JT! Posted October 23, 2005 Report Share Posted October 23, 2005 They're quite hard to get open if you haven't done it befor. You take the lockring off and then there's a clip which you need to twang off with a screwdriver, they just forse the shell of it's body. Good luck. :) Quote Link to comment Share on other sites More sharing options...
Jeza Posted October 23, 2005 Author Report Share Posted October 23, 2005 Thanks JT mate, good luck :) sounds as though i havent got a hoping hell Quote Link to comment Share on other sites More sharing options...
JT! Posted October 23, 2005 Report Share Posted October 23, 2005 (edited) Thanks JT mate, good luck :) sounds as though i havent got a hoping hell It's when you have to get the shell off the freewheel, then you'll get stuck. Becuase you have to use a hell of alot of jip to get it off. Putting it back on is easy, you just lay two spanners down so it pushes the shell up, and the body goes between them. Edited October 23, 2005 by JT! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.