bristol_base Posted October 12, 2005 Report Share Posted October 12, 2005 hi guys i have just fitted a front shimano deore hydro disc 'complete setup' and it's skreecthing like hell 'i have slightly rubbed down the pads with a file but the noise remains the same? any advice on how to cure this would be useful Quote Link to comment Share on other sites More sharing options...
Mr Motivator Posted October 12, 2005 Report Share Posted October 12, 2005 Chuck a glass of water over it all and ride fast and apply the brake. That will help to boost the bedding in proccess. Quote Link to comment Share on other sites More sharing options...
CurtisRider Posted October 12, 2005 Report Share Posted October 12, 2005 undo the top bolts on the adaptor-sorry poor description, but the 2 bolts that join the calliper onto the brake mount?, pull he brake on and then tightne them, theis centres the brake and makes it all lined up nicely (Y) then break it in like sam says, with some water and a alot of fast stops to heat the brake up, itll soon bed in, take them on a muddy ride, that soon sorts them! Quote Link to comment Share on other sites More sharing options...
Endohopper Posted October 12, 2005 Report Share Posted October 12, 2005 I had similar problems when I was running one on the front . I was still dissatisfied with the screeching and lack of bite after various bedding in attempts , so ditched the supplied pads in favour of some aftermarket ones , EBC I think . Pretty good brake when well set up . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.