Mr Batch UK Posted October 7, 2005 Report Share Posted October 7, 2005 hiya, I got a Alex DX32 and I really want to drill it out, could some one please help me in how to do this please or is there a topic with a few pictures going at all ? Also if some one lives local to me i would pay them for doing it as im not to kean my self as ill prob drill a spoke out :) woops !! Thanks alot Adam Quote Link to comment Share on other sites More sharing options...
joshywa Posted October 7, 2005 Report Share Posted October 7, 2005 can't say ive done it but i'd geuss you'd be best off taking the wheel apart then drilling it, it would stop you hitting any spokes with a drill bit. Quote Link to comment Share on other sites More sharing options...
Endohopper Posted October 7, 2005 Report Share Posted October 7, 2005 As suggested above , this is best done when the rim is not built up . This allows you to clamp the rim and drill from the inside out . Quote Link to comment Share on other sites More sharing options...
moo Posted October 7, 2005 Report Share Posted October 7, 2005 take your tyre etc off mark holes with a marker pen and drill. youl find itll look pants and youl have hardly any weight loss plus youl never get rid of all the swarf and get punctures. save money buy a try all rim and get it built on to your wheel should cost no more than £20 for a decent wheel build, then youl have a good light strong wheel :P Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.