hulltrialser Posted October 3, 2005 Report Share Posted October 3, 2005 Alreet people im wanting to get my profile built up but a koxx rim is too wide as ive used one of these and a ronnie is too thin so it there any good rim inbetween both of them. Help would be very appriciated. Ben Quote Link to comment Share on other sites More sharing options...
aust Posted October 3, 2005 Report Share Posted October 3, 2005 what frame are you running :bunny:... sounds odd Quote Link to comment Share on other sites More sharing options...
nb88 Posted October 3, 2005 Report Share Posted October 3, 2005 A ronnie definatelty shouldnt be too thin......and if it is, a koxx rim with definately fit..... Koxx rims are 47mm, ronnies are 38mm, so less than 1cm difference - so how can 1 be too wide and the other too narrow? Just move your pads in further for the ronnie... Says on your profile youve got an echo team frame aswell? So the ronnie should definately fit as echo rims are the same width. Quote Link to comment Share on other sites More sharing options...
hulltrialser Posted October 3, 2005 Author Report Share Posted October 3, 2005 an echo team but the sylinders on the magura are always real far out and i catch my foot on them and a ronnie i have to have sylinders fully in for it to reach the rim and the tpa goes all gay also ive snapped a ronnie too. Ben Quote Link to comment Share on other sites More sharing options...
Mark W Posted October 3, 2005 Report Share Posted October 3, 2005 It is a little weird you can't use either? Are you sure? I'm running a Try-All in my Zona Zip frame, and that's about perfect really. The cylinders are set pretty far out, but I've used Heatsink Blau's and Koxx greens, and they both fitted in fine. With a Megamo drilled rim in there (about 38mm) it was set-upable too, you just had to have the cylinders right the way in. I don't get how neither can work... Quote Link to comment Share on other sites More sharing options...
nb88 Posted October 3, 2005 Report Share Posted October 3, 2005 an echo team but the sylinders on the magura are always real far out and i catch my foot on them and a ronnie i have to have sylinders fully in for it to reach the rim and the tpa goes all gay also ive snapped a ronnie too. Ben Are your pads worn down a lot? what pads are they? My cylinders are all the way out on my bike aswell, i just live with it really. (im using a pad bodge so my pads are VERY wide) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.